曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 S 012-007-B00
 WARNING: OBEY THE INSTRUCTIONS IN THE PROCEDURE TO REMOVE THE THRUST
_______ REVERSERS. IF YOU DO NOT OBEY THE INSTRUCTIONS, UNJURIES TO PERSONS AND DAMAGE TO EQUIPMENT CAN OCCUR.
 (2) Remove the Thrust Reverser Half (AMM 78-31-01/401). ~.............................................................................. | Bolt Gap/Dimensions AIPC 54-42-50-01A | ................................................................................ | AMM | | | | IPC | |Fig. 202 Item # | Part | Name | Min Max | Item # | ................................................................................ | 6 |311A1744 |Fitting | 1.28 | 1.30 |70 | ................................................................................ | 5 |311A1563 |Bolt Shank | 1.31 | 1.33 |10 | ................................................................................ | 7 |311A1563 |Washer | 0.057 | 0.069 |15 | ................................................................................ | |Required Gap | | 0.010 | 0.050 | | 2................….............…............…............…............…........1
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 54-42-13
 ALL  ú ú B06 Page 211 ú Jul 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 TASK 54-42-13-022-044-B00
 3. Hinge Link Removal, Forward Fitting (Fig. 202)
___________________________________
 A. References
 (1)  
AIPC 54-00-00, Fig. 1

 (2)  
AIPC 54-42-50

 (3)  
CMM 54-50-01

 (4)  
SRM 54-50-90

 B. Access
 (1)  Location Zones
 500 Left Nacelle
 600 Right Nacelle

 C. Procedure
 S 012-008-B00
 (1)  
Do this task: Get Access to the Hinges for the Thrust Reverser.

 S 862-071-B00

 (2)  
Make a note of the hinge link position.

 NOTE: This is help when you install the hinge link.
____
 S 022-009-B00
 (3)  Remove the nut (7), washers (4,6), bushing (5), and shoulder bolt
 (3) from the forward hinge fitting (1).
 S 022-010-B00
 (4) Remove the hinge link (2) from the thrust reverser half.
 (a)  Remove the nut, washer, and bolt.
 S 202-011-B00
 (5)  Examine the hinge link (2) for damage.
 (a)  If you find damage repair the hinge link (CMM 54-50-01) or replace it.
 S 202-012-B00
 (6)  
Examine the forward hinge fitting (1) for damage (SRM 54-50-90).

 (7)
Do this task: Hinge Link Installation, Forward Fitting.

 S 422-013-B00
 TASK 54-42-13-422-046-B00
 4. Hinge Link Installation, Forward Fitting (Fig. 202)
________________________________________
 A. References
 (1)  AIPC 54-42-50
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 54-42-13
 ALL  ú ú B07 Page 212 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 B. Access
 (1)  Location Zones
 500 Left Nacelle
 600 Right Nacelle

 C. Procedure
 S 422-021-B00
 (1)  
Put the hinge link in the clevis of hinge on the thrust reverser half.

 S 422-022-B00

 (2)  
Install the bolt, washers, and nut.

 S 412-023-B00

 (3)
Do this task: Put the Airplane Back to Its Usual Condition.

 NOTE: The thrust reverser installation task connects the link to
____
 the strut fitting.

 TASK 54-42-13-022-014-B00
 5. Roller Swage Vibration Isolator Removal, Forward and Center Fittings
____________________________________________________________________
 (Fig. 202, 203)

 A. Equipment
 (1)  
MIT311A1550 - Bearing Replacement Tool Kit

 (2)  
Hand Pump

 B. Access
 (1)  Location Zones
 500 Left Nacelle
 600 Right Nacelle
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 NACELLES/PYLONS(51)