54-10-00
 ALL  ú ú B04 Page 415 ú Jul 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 434-035-B00
 (23)
 Connect the electrical connectors and attach the clamps that you loosened at the leading edge attach point.

 S 414-036-B00

 (24)
 Install the fuel and hydaulic lines.

 S 434-037-B00

 (25)
 Install the pneumatic duct with new seals.

 (a)  Tighten the clamps to 105-120 pound-inches
 (12-14 Newton meters).

 S 834-038-B00
 (26)
 Connect the engine thrust lever and fuel shutoff controls.

 S 714-059-B00

 (27)
 Adjust the engine thrust lever (AMM 76-11-00/501).

 S 434-039-B00

 (28)
 Connect the feedback cables for the thrust reverser control.

 S 714-060-B00

 (29)
 Adjust the feedback cables for the thrust reverser control (AMM 78-34-02/201).

 S 794-041-B00

 (30)
 Do a leakage check of all the lines before you install the panels as follows:

 (a)  
The pneumatic duct

 (b)  
The hydraulic tubes

 (c)  
The fuel tube.

 (31)
 Install the slat access panel.

 S 414-044-B00
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 54-10-00
 ALL  ú ú B02 Page 416 ú Jul 15/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 414-045-B00
 (32)
 Install the access panel for the outboard mid fairing.

 S 414-046-B00

 (33)
 Install the strut access door.

 S 414-047-B00

 (34)
 Install the leading edge strakelet (outboard of the strut).

 S 414-048-B00

 (35)
 Install the access panel on the leading edge.

 S 414-043-B00

 (36)
 Install the engine on the strut (AMM 71-00-02/401).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 54-10-00
 ALL  ú ú B02 Page 417 ú Jul 15/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 NACELLE STRUT - ADJUSTMENT/TEST
_______________________________
 1.  General_______
 A.  There is one task in this procedure:
 (1)  The adjustment of the access panels and the fairing on the nacelle strut for correct aerodynamic smoothness.
 B.  You must adjust the fairing door and the access panel of the nacelle strut to make sure they are aerodynamically smooth with the structure.
 C.  You must do this procedure when you replace an access panel or a fairing to make sure the clearances with the structure are in the limits.
 TASK 54-10-00-825-001-B00
 2.  Nacelle Strut Adjustment________________________
 A.  General
 (1)  When you adjust the access panels and fairings, it can be necessary to decrease or increase the surface to get the correct aerodynamic smoothness clearances.
 (a)  
To increase the height of the panel or fairing, you can add shims.

 (b)  
To decrease the thickness, you must remove material from the panel or fairing.

 B.  Consumable Materials
 (1)  
A00247 Sealant, BMS 5-95

 (2)  
A00310 Sealant, BMS 5-79

 C.  References
 (1)  
12-30-00/201, Access Doors and Panels

 (2)  
20-30-11/201, Adhesive, Cements and Sealers

 D.  Access
 (1)  
Location Zone
 500 Left Nacelle
 600 Right Nacelle

 (2)  
Access Panel
 5723 Access Door - Left Nacelle
 5823 Access Door - Right Nacelle

 5724 Access Door - Left Nacelle 5824 Access Door - Right Nacelle
 5725 Access Door - Left Nacelle 5825 Access Door - Right Nacelle
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 NACELLES/PYLONS(8)