曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
NO. INDEX PART NAME  DIM.  (INCHES) DESIGN LIMITS  (INCHES) WEAR LIMITS  WORN PART REPLACE  PART WORN REPAIR  INSTR. REPAIR 
DIAMETER  ALLOWEDDIM. WEAR  MAX ANCE CLEAR-DIAM 
MIN  MAX 
1  HINGE  ID  0.8125  0.8130  0.0020 X 
2  HINGE BEARING OD  0.8120  0.8125  1 
2  HINGE BEARING RACE  ID 0.6260  0.6265  0.6295  0.006 RADIAL  1 
3 HINGE BEARING BALL  OD  0.6245  0.6250  1 
3 HINGE BEARING BALL  ID  0.3745  0.3750  0.3762  0.008 AXIAL  1 
4 BOLT  OD  0.3740  0.3745  0.3728  X 
5 HOLD-OPEN ROD  ID  0.6250  0.6256  0.6261  0.0000  X 
6 HOLD-OPEN ROD OUTER BUSHING  OD  0.6261  0.6267  0.6256  2 
6  HOLD-OPEN ROD OUTER BUSHING  ID  0.5000  0.5006  0.5010  0.0000  2 
7 HOLD-OPEN ROD INNER BUSHING  OD  0.5010  0.5016  0.5006  2 
7 HOLD-OPEN ROD INNER BUSHING  ID  0.3745  0.3755  0.3767  0.0032  2 
8 BOLT  OD  0.3735  0.3745  0.3723  X 

REPLACE HINGE REPLACE HOLD-OPEN ROD
Fan Cowl Panel Inspection
Figure 601 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 71-11-02
 ALL  ú ú C01 Page 603 ú Jul 15/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
(c)  Lubricate the shank of the bolt with grease.
 NOTE:____ Do not lubricate the bolt threads with grease.
 (d)  Install the bolt, washer and nut on the hinge.
 (5)  S 216-006-C00Examine the hold-open rod for signs of wear.
 (6)  S 226-007-C00If it is necessary, do the steps that follow to measure the wear of the hold-open rod. (a) Remove the fan cowl panel (AMM 71-11-02/401). (b) Remove the bolt and nut from the hold-open rod. (c) Measure the components for wear (Fig. 601). (d) Install the bolt and nut on the hold-open rod. (e) Install the fan cowl panel (AMM 71-11-02/401).
 (7)  S 416-008-C00Close the fan cowl panel (AMM 71-11-02/201).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 71-11-02
 ALL  ú ú C01 Page 604 ú Jul 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
FAN COWL PANEL LATCH - REMOVAL/INSTALLATION
___________________________________________
 1.  General_______
 A.  This procedure contains the removal and installation for the lower latches for the fan cowl panel. The latch mechanism includes the latches on the left fan cowl panel and the latch keepers on the right fan cowl panel.
 B.  The steps to remove and install the latches are in paragraph 2 and 3.
 The steps to remove and install the latch keepers are in paragraph 4 and

 5.

 C.  
You can do this procedure with the fan cowl panels on or off the engine.

 TASK 71-11-03-004-001-C00
 2.  Remove the Fan Cowl Panel Latch_______________________________
 A.  References
 (1)  
AMM 71-11-02/201, Fan Cowl Panel

 B.  
Access

 (1)  
Location Zones
 506 Engine No. 1 - Fan Frame
 606 Engine No. 2 - Fan Frame

 (2)  
Access Panels
 5746/5846 Fan Cowl Panel (LH)
 5737/5837 Fan Cowl Panel (RH)

 C.  
Procedure (Fig. 401)

 S 014-002-C00
 (1)  
If the fan cowl panel is on the engine, open the left fan cowl panel (AMM 71-11-02/201).

 S 034-003-C00

 (2)  
Remove the cotter pin from the nut.

 (a)  Discard the cotter pin.
 S 034-004-C00
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 動力裝置 POWER PLANT 2(133)