1)  Apply a minimum torque of 18 pound-inches (2 Newton meters) in the direction of the bolt removal.
 NOTE: Apply only the minimum torque to prevent worn
____ threads. It is not necessary to find the breakaway torque.
 2)  If you cannot get the minimum torque, replace the barrel nuts and examine the bolt for worn threads.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 71-21-02
 ALL  ú ú C02 Page 404 ú Jul 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
(f)  Tighten the five bolts to 585-715 pound-inches
 (66-81 Newton meters).

 NOTE: Keep a constant clearance between the thrust fitting and
____
 the strut.

 S 424-003-C00
 (4)  Install the two thrust links on the thrust link assembly.
 (a)  
Attach the thrust links to the evener bar with the bolt, nut, and two washers at each link.

 (b)  
Attach the thrust links to the fan frame with the bolt, nut, and two washers at each link.

 (c)  
Tighten the nuts to 90-165 pound-inches (10-19 Newton meters).

 S 414-004-C00
 WARNING: OBEY THE INSTRUCTIONS IN THIS PROCEDURE WHEN YOU CLOSE THE
_______ THRUST REVERSERS. IF YOU DO NOT OBEY THE INSTRUCTIONS, INJURY TO PERSONS OR DAMAGE TO THE EQUIPMENT CAN OCCUR.
 (5)  
Close the thrust reversers (AMM 78-31-00/201).

 S 414-005-C00

 (6)  
Close the fan cowl panels (AMM 71-11-02/201).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 71-21-02
 ALL  ú ú C02 Page 405 ú Jul 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
AFT ENGINE MOUNT - REMOVAL/INSTALLATION
_______________________________________
 1.  General
_______
 A.  The aft engine mount is attached to the turbine frame at the 12 o'clock position. You must remove the power plant before you remove the aft mount.
 TASK 71-21-03-004-001-C00
 2.  Remove the Aft Engine Mount (Fig. 401)
___________________________
 A.  References
 (1)  
71-00-02/401, Power Plant

 B.  
Access

 (1)  
Location Zones
 506 Engine No. 1 - Fan Frame
 606 Engine No. 2 - Fan Frame

 C.  
Procedure

 S 024-002-C00
 (1)  
Remove the power plant (Ref 71-00-02/401).

 S 034-003-C00

 (2)  
Remove the attach bolt retainers.

 S 034-004-C00

 (3)  
Remove the bolts, nuts, and washers that attach the aft mount to the turbine frame lugs.

 S 034-005-C00

 (4)  
Remove the mount from the turbine frame.

 S 034-006-C00

 (5)  
Disassemble the aft engine mount.

 (a)  
Remove the nut retainer and bolt retainers attached by two bolts, nuts, and washers.

 (b)  
Remove the bolt, nut, and two washers at each link and remove the links from the hangar fitting.

 TASK 71-21-03-404-007-C00
 3.  Install the Aft Engine Mount (Fig. 401)
____________________________
 A.  References
 (1)  54-42-11/201, Barry Controls Isolator
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 71-21-03
 ALL  ú ú C01 Page 401 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
SEEA B
(2 LOCATIONS) ATTACH BOLT RETAINER 
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機(jī)維護(hù)手冊 動力裝置 POWER PLANT 2(154)