27-81-02
 ALL  ú ú 01 Page 608 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

NO. INDEX  PART NAME  DIM.  DESIGN LIMITS  WEAR LIMITS  WORN PART REPLACE  PART WORN REPAIR  INSTR REPAIR 
DIAMETER  PER-MITTED DIM. WEAR  DIA ANCE CLEAR-MAX 
MIN  MAX 
2 29  BUSHING  ID  0.3120  0.3130  0.3170  0.0050  X 
BOLT  OD  0.3115  0.3120  0.3070  X 
1 30  BUSHING  ID  0.4370  0.4380  0.4420  0.0055  X 
BUSHING  OD  0.4358  0.4365  0.4315  X 
2 30  BUSHING  ID  0.5000  0.5006  0.5055  0.0060  X 
BUSHING  OD  0.4988  0.4995  0.4940  X 
31 1  BUSHING  ID  0.2495  0.2505  0.2545  X 
BOLT  OD  0.2490  0.2495  0.2445  X 
31 2  BUSHING  ID  0.3120  0.3130  0.3170  0.0050  X 
BOLT  OD  0.3115  0.3120  0.3070  X 
32 1  BEARING  ID  0.2495  0.2500  0.2545  X 
BOLT  OD  0.2490  0.2495  0.2445  X 
32 2  BEARING  ID  0.3120  0.3125  0.3170  X 
BOLT  OD  0.3115  0.3120  0.3070  X 
33 1  BUSHING  ID  0.2495  0.2500  0.2545  X 
BOLT  OD  0.2490  0.2495  0.2445  X 
33 2  BUSHING  ID  0.3120  0.3125  0.3170  0.0050  X 
BOLT  OD  0.3115  0.3120  0.3070  X 

Variable Camber Flap Wear Limits
Figure 601 (Sheet 8)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-81-02
 ALL  ú ú 01 Page 609 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 MAINTENANCE MANUAL
 (2)  S 226-003Examine the variable camber flaps (Fig. 601): (a) Remove the parts to be examined. (b) Use a micrometer to measure the dimensions of these parts. (c) Compare the part dimensions to the limit dimensions. (d) If the part dimension is out of tolerance, replace the part. (e) Install all the parts removed to do the check.
 (3)  S 426-004Do this task: "Variable Camber Flaps Installation" (AMM 27-81-02/401).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-81-02
 ALL  ú ú 01 Page 610 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 VARIABLE CAMBER FLAPS - REPAIRS
_______________________________
 1.  General_______
 A.  This procedure contains the task to repair the variable camber flaps.
 B.  The variable camber flaps are the leading edge (LE) flaps No. 1E-10 and 17-26E. It is not necessary to replace a damaged variable camber flap if the damage is not more than the permitted limits.
 TASK 27-81-02-308-001
 2.  Variable Camber Flaps Repair____________________________
 A.  Standard Tools and Equipment
 (1)  
Micrometers, to measure internally and externally

 B.  
References

 (1)  
AMM 27-81-02/401, Variable Camber Flaps

 (2)  
AIPC 27-81-02, Fig. 1

 (3)  
AIPC 27-81-02, Fig. 5

 (4)  
AIPC 27-81-02, Fig. 10

 (5)  
SRM 57-43-02, LE Flap Structure

 (6)  
SSM 27-81-01, SSM 27-81-02, SSM 27-81-03, SSM 27-81-04, SSM 27-81-05, SSM 27-81-06

 (7)  
WDM 27-51-21, WDM 27-51-22, WDM 27-81-11, WDM 27-81-12, WDM 27-81-21, WDM 27-81-22, WDM 27-81-31, WDM 27-81-32, WDM 27-81-41, WDM 27-81-42, WDM 27-81-81, WDM 27-81-82

 C.  
Access

 (1)  
Location Zone
 522 Variable Camber Flap, LH
 523 Variable Camber Flap, LH
 524 Variable Camber Flap, LH
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 7(95)