(a)
Remove the material as necessary with the PWA 29914 Cutter to form the 10 degree angle.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-31-02
ALL ú ú N01 Page 821 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
PLANE Z
(P/N 56A821)
L-A6147 L-B1525
Leading Edge Contour Repair Figure 808 (Sheet 1)
H18968
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-31-02
ALL ú ú N01 Page 822 ú Oct 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
7
PLANE Z
(P/N 56A621)
L-A6147 L-B1525
Leading Edge Contour Repair Figure 808 (Sheet 2)
H75257
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-31-02
ALL ú ú N01 Page 823 ú Oct 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
INDEX P/N 56A821 BLADES P/N 56A621 BLADES
1 THICKNESS WITHIN INDEX 1 IS NOT TO BE LESS THAN THE ACTUAL MAKE SMOOTH BETWEEN ZONES J AND K WITHIN INDEX 1. MINIMUM OF ADJACENT ZONE ABOVE PLANE V. THICKNESS OF LEADING EDGE AT LOCATION DA (VIEW A-A, ZONE J)
2 (596.0-602.4 mm) 23.465-23.715 INCHES 22.609-22.859 INCHES (574.3-580.6 mm)
3 ABOVE PLANE X. THICKNESS OF LEADING EDGE AT LOCATION DE OF ADJACENT ZONE THICKNESS WITHIN INDEX 3 IS NOT TO BE LESS THAN THE ACTUAL MAKE SMOOTH BETWEEN ZONES K AND L WITHIN INDEX 3. MINIMUM
4 (615.1-621.4 mm) 24.215-24.465 INCHES 23.609-23.359 INCHES (599.7-593.3 mm)
5 (198.4-204.8 mm) 7.812-8.062 INCHES 7.812-8.062 INCHES (198.4-204.8 mm)
6 8.562-8.812 INCHES (217.5-223.8 mm) 8.562-8.812 INCHES (217.5-223.8 mm)
7 TANGENT OF PLATFORM ROOT FILLET RADIUS
Leading Edge Contour Repair
Figure 808 (Sheet 3)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-31-02
ALL ú ú N01 Page 824 ú Oct 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
H18970
0.025-0.031 INCH (0.635-0.787 mm)
AIRFOIL SECTION PROFILE
0.041-0.047 INCH EXAMPLE SECTION OVER ZONE J (1.042-1.193 mm)
EXAMPLE SECTION OVER ZONE K
B-B
CHAMFER IF NECESSARY TO
MAINTAIN THIS DIMENSION
FROM PLANE M TO PLANE X. L-A6148
Leading Edge Contour Repair
Figure 808 (Sheet 4)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-31-02
ALL ú ú N01 Page 825 ú Oct 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
H75261
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
0.007 INCH
(1.016 mm) 4
E-E
THIS RADIUS MUST BE BLENDED SMOOTHLY WITH REMAINDER OF AIRFOIL CONTOUR.
BLEND SMOOTHLY WITHIN REMAINDER OF AIRFOIL SECTION. PROFILE THICKNESS IN ZONE P MUST NOT BE LESS THAN THICKNESS MEASURED AT LOCATIONS Q OR R AS APPLICABLE.
MEASURE THICKNESS AT THIS DIMENSION. L-A6148
Leading Edge Contour Repair
Figure 808 (Sheet 5)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：747-400 AMM 飛機維護手冊 發動機 ENGINE 1(167)
