................................................................................. | AP-8 | | GASKET | | | 40-50 | | (45°) |DIFFUSER CASE| PWA PN 673049 | LOCKWIRE |SILVER GOOP| (4.5-5.6) | ................................................................................. | AP-8 | | GASKET | | | 40-50 | | (128°) |DIFFUSER CASE| PWA PN 673049 | LOCKWIRE |SILVER GOOP| (4.5-5.6) | ................................................................................. | AP-8 | | GASKET | | | 40-50 | | (172°) |DIFFUSER CASE| PWA PN 673049 | LOCKWIRE |SILVER GOOP| (4.5-5.6) | ................................................................................. | AP-8 | | GASKET | | | 40-50 | | (225°) |DIFFUSER CASE| PWA PN 673049 | LOCKWIRE |SILVER GOOP| (4.5-5.6) | ................................................................................. | AP-8 | | GASKET | | | 40-50 | | (277°) |DIFFUSER CASE| PWA PN 673049 | LOCKWIRE |SILVER GOOP| (4.5-5.6) | ................................................................................. | AP-8 | | GASKET | | | 40-50 | | (338°) |DIFFUSER CASE| PWA PN 673049 | LOCKWIRE |SILVER GOOP| (4.5-5.6) | ................................................................................. | | REAR OF | WASHER | | | 40-50 | | AP-9 |DIFFUSER CASE| PWA PN 584977 | LOCKWIRE |SILVER GOOP| (4.5-5.6) | ................................................................................. | | 2ND-STAGE | GASKET | | | 54-60 | | AP-10 | HPT BLADE | PN ST1146-08 | LOCKWIRE |SILVER GOOP| (6.1-6.8) | ................................................................................. | | 1ST-STAGE | | | | 75-85 | | AP-11 | HPT BLADE | GASKET | LOCKWIRE |SILVER GOOP| (8.5-9.6) | 2..........….............…...............…...........…...........…..............1 *[1] AP-11 borescope plug is optional.
(a)
Lubricate the plug threads with silver goop.
(b)
Install the plugs with new AP-8 Gaskets.
NOTE: You can use the old gaskets if they are not damaged.
____
(c)
Tighten the AP-8 plugs to 40-50 pound-inches (4.519-5.649 newton-meters).
(d)
Install lockwire on the AP-8 plugs.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-00-00
ALL ú ú N03 Page 682X ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
No. 16 - Combustion Chamber Inspection
______________________________________
S 866-197-N00
(6) Do this task: Put the Airplane Back to its Usual Condition.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-00-00
ALL ú ú N02 Page 682Y ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
No. 17 - HPT (1st- and 2nd-Stage) Blade and Duct Segments, and (1st-Stage)
__________________________________________________________________________
Vane Inspection
_______________
TASK 72-00-00-206-198-N00
17. HPT (1st- and 2nd-Stage) Blade and Duct Segments, and (1st-Stage) Vane______________________________________________________________________ Inspection__________
A. General
(1) This inspection is the visual check of the HPT 1st- and 2nd-stage blades, duct segments and the 1st-stage vanes.
CAUTION: USE CAUTION WHEN YOU USE THIS PROCEDURE TO MAKE A DECISION
_______ ABOUT THE CONDITION OF THE ENGINE. THE BORESCOPE INSPECTION LIMITS ARE A RESULT OF TESTS AND STRUCTURAL ANALYSIS. THE PART LIFE AND THE PERFORMANCE OF THE ENGINE CAN DECREASE QUICKLY WHILE THE DAMAGE OF THE PARTS BECOMES NEAR TO THE MAXIMUM CONTINUE-IN-SERVICE LIMITS.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 發動機 ENGINE 1(77)
