曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 (m)  Clean the surfaces with the Methyl Ethyl Ketone (MEK). 1) Make the surfaces dry with a clean cloth.
 (n) For the right 2.9 bleed valve, install the 2.9 bleed duct with the steps that follow: 1) Install the 2.9 bleed duct on the 2.9 bleed valve with the ground bracket and the support bracket for the wire bundle. a) Install the ground bracket on the flange of the 2.9 bleed duct found at the 2 to 5 o'clock position. b) Install the support bracket for the wire bundle on the bottom face of the top flange on the 2.9 bleed valve at the 12:30 to 2 o'clock position.
 2)  Lubricate the threads of the bolts, which attach the 2.9 bleed duct, with engine oil.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 75-32-03
 ALL  ú ú N02 Page 411 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
3) Install the bolts and nuts. a) Tighten the bolts, from one side to the other side, to 75-85 pound-inches (8.5-9.6 newton-meters).
 (o)  For the left 2.9 bleed valve, attach the 2.9 bleed duct with the steps that follow: 1) Install the 2.9 bleed duct on the 2.9 bleed valve with the
 ground bracket, support bracket for the fire detector, and harness support bracket. a) Install the support bracket for the fire detector on
 the flange of the 2.9 bleed duct at the 9 to 12 o'clock position. b) Install the harness support bracket on the flange of the 2.9 bleed duct at the 3 o'clock position. 2) Lubricate the threads of the bolts, which attach the 2.9 bleed duct, with engine oil. 3) Install the bolts and nuts. a) Tighten the bolts, from one side to the other side, to 75-85 pound-inches (8.5-9.6 newton-meters).
 (p)  
Do a check for a maximum resistance of 0.005 ohm between the ground bracket and the top flange of the 2.9 bleed valve (AMM 20-22-01/601).

 G.
Return the Aircraft to Its Usual Condition.

 S 414-047-N00
 WARNING: OBEY THE INSTRUCTIONS IN AMM 78-31-00/201 WHEN YOU CLOSE THE
_______ THRUST REVERSERS. IF YOU DO NOT OBEY THE INSTRUCTIONS, INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT CAN OCCUR.
 (1)  
Close the thrust reverser (AMM 78-31-00/201).

 (2)  
Close the core cowl panel (AMM 71-11-06/201).

 (3)  
Close the fan cowl panel (AMM 71-11-04/201).

 S 414-043-N00
 S 414-048-N00
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 75-32-03
 ALL  ú ú N02 Page 412 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
S 444-044-N00
 (4)  Do the activation procedure for the thrust reverser (AMM 78-31-00/201).
 S 864-028-N00
 (5)  For the left 2.9 bleed valve, remove the DO-NOT-CLOSE tags and close these circuit breakers for the applicable engine as follows:
 (a)  P6 Main Power Distribution Panel
 1) 6D1 OIL PRESS ENG 1
 2) 6D2 OIL PRESS ENG 2
 3) 6D3 OIL PRESS ENG 3
 4) 6D4 OIL PRESS ENG 4
 5) 6L10 FUEL CONT VALVE ENG 1
 6) 6L11 FUEL CONT VALVE ENG 2
 7) 6L12 FUEL CONT VALVE ENG 3
 8) 6L13 FUEL CONT VALVE ENG 4

 (b)  P180 DC Power Distribution Panel
 1) 180C8 GCU 1
 or
 180M4 GCU 1
 2) 180C9 GCU 2
 or
 180M5 GCU 2
 3) 180C10 GCU 3
 or
 180M6 GCU 3
 4) 180C11 GCU 4
 or
 180M7 GCU 4
 5) 180C12 GEN DRIVE DISC 1
 or
 180L4 GEN DRIVE DISC 1
 6) 180C13 GEN DRIVE DISC 2
 or
 180L5 GEN DRIVE DISC 2

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 75-32-03
 ALL  ú ú N02 Page 413 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 大氣 AIR 2(75)