75-33-00
ALL ú ú N01 Page 603 ú Oct 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
SEE E
SEE G
SEE F
FWD
L-A4447
SEE H
E
HPC Secondary Flow Control System Inspection
Figure 601 (Sheet 3)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
75-33-00
ALL ú ú N01 Page 604 ú Oct 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
INTERMEDIATE CASE
HPC SECONDARY FLOW CONTROL VALVE RIGHT 2.9
AND IDG AIR/OIL HEAT EXCHANGERBLEED VALVE
VALVE OVERRIDE SOLENOID (REF)
PS3 AIR
FILTER FWD
FWD
G VALVE OVERRIDE PRESSURE IDG AIR/OIL HEAT EXCHANGER
SWITCH (REF)
F
VISUAL POSITION
INDICATOR
RIGHT HPC SECONDARY
FLOW CONTROL VALVE
H
FWD
HPC Secondary Flow Control System Inspection
Figure 601 (Sheet 4)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
75-33-00
ALL ú ú N01 Page 605 ú Dec 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
S 046-018-N00
WARNING: DO THE THRUST REVERSER DEACTIVATION PROCEDURE TO PREVENT THE
_______
OPERATION OF THE THRUST REVERSER. THE ACCIDENTAL OPERATION OF
THE THRUST REVERSER CAN CAUSE INJURIES TO PERSONS OR DAMAGE TO
EQUIPMENT.
(2)
Do this procedure: Thrust Reverser Deactivation for Ground
Maintenance (AMM 78-31-00/201).
S 016-014-N00
(3)
Open the core cowl panels (AMM 71-11-06/201).
S 016-019-N00
WARNING: OBEY THE INSTRUCTIONS IN AMM 78-31-00/201 WHEN YOU OPEN THE
_______
THRUST REVERSERS. IF YOU DO NOT OBEY THE INSTRUCTIONS,
INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT CAN OCCUR.
(4)
Open the thrust reversers (AMM 78-31-00/201).
D.
Examine the Control System of the HPC Secondary Flow
S 216-003-N00
(1)
Visually examine the control valves for the HPC secondary flow.
(a)
Examine the control valves for correct installation.
(b)
If there is a loose control valve, tighten or replace the mounting bolt(s).
(c)
Examine the control valves for cracks.
(d)
If there are cracks found, replace the control valve(s) (AMM 75-33-01/401).
(e)
Examine the position of the visual position indicator pins on the control valves.
(f)
If the position indicator pin(s) is not fully extended, replace the control valve (AMM 75-33-01/401).
S 216-004-N00
(2)
Visually examine the PS3 air filter (the control valve filter for
the HPC secondary flow) assemblies for cracks and the correct
installation.
(a)
No cracks are permitted.
1) Replace the filter assembly if there is a crack (AMM 75-33-02/401).
(b)
If there is a loose filter assembly, replace or tighten the mounting bolt(s).
S 016-005-N00
(3) Remove the No. 7 segment of the fan exit liner (AMM 72-34-03/401) to get access to the control valve and valve solenoid of the turbine vane and blade cooling air.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
75-33-00
ALL ú ú N01 Page 606 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
S 216-006-N00
(4) Visually examine the control valve and the valve solenoid for the
turbine vane and blade cooling air.
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 大氣 AIR 2(89)
