27-51-02
ALL ú ú 01 Page 501 ú Jun 20/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
UP-STOP
A Inboard TE Flap Adjustment Figure 501 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-02
ALL ú ú 01 Page 502 ú Mar 20/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
B-B
LUBRICATE THE BEARING WITH GREASE THROUGH THE
LUBRICATION FITTING AFTER INSTALLATION GREASE COMPLETELY FROM THE BOLT THREADS.
Inboard TE Flap Adjustment
Figure 501 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-02
ALL ú ú 01 Page 503 ú Mar 20/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
BALL SCREW ON THE INBD TRANSMISSION
INBOARD TRANSMISSION
SEE B
OUTBOARD TRANSMISSION
SEE A
OUTBOARD TRANSMISSION
SEE A BALL SCREW ON THE OUTBD TRANSMISSION
SLIDING SPLINED
COUPLING
1 TORQUE TUBE
2
TORQUE TUBE
DRIVE
SHAFT
ANGLE GEARBOX
OUTBOARD
TRANSMISSION FWD
OUTBOARD
INBOARD TRANSMISSION INBD TRANSMISSION
A
INBOARDTRANSMISSION
1 BEFORE INSTALLATION APPLY GREASE TO THE INTERNAL AND EXTERNAL SURFACES OF (REAR VIEW) MATING SPLINES. INSTALL THREE SCREWS
B
TO FIX THE COUPLING TO THE MATING PART AND
LOCKWIRE THE SCREWS TOGETHER. AFTER
INSTALLATION FILL THE COUPLING CAVITY WITH
GREASE THROUGH THE LUBRICATION HOLE
2 APPLY GREASE
Inboard TE Flap Transmissions Figure 502
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-02
ALL ú ú 01 Page 504 ú Mar 20/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
TE FLAP PDU
(FWD END OF LEFT MLG WHEEL WELL)
SEE A
INDEX MARKS SEE B INDEX MARKS NO. 1
FWD
INBD
B INDEX MARKS NO. 1 A TE FLAP PDU
Figure 503 Power Drive Unit (PDU) for the TE Flap
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-02
ALL ú ú 01 Page 505 ú Mar 20/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
C. References
(1)
06-44-00/201, Wing Access Doors and Panels
(2)
27-01-00/501, Flight Control Lateral Trim Correction
(3)
27-51-00/501, Trailing Edge Flap System
(4)
27-51-06/401, Inboard Trailing Edge Flap Transmissions
(5)
27-51-10/401, Inboard Trailing Edge Flap Outboard Angle Gearbox
(6)
27-51-12/501, Inboard Trailing Edge Aft Flap
(7)
27-51-14/501, Outboard Trailing Edge Flap
(8)
27-51-30/201, Inboard Trailing Edge Flap Track Fairings
(9)
29-11-00/201, Pressurize/Depressurize Main Hydraulic System
(10)
32-00-15/201, Landing Gear Door Lock
(11)
32-00-20/201, Landing Gear Downlock
(12)
32-12-10/401, Main Landing Gear Trunnion Fairing Door
(13)
57-51-10/401, Main Landing Gear Trunnion Fairing
D.
Access
(1)
Location Zones
143/144 MLG Wheel Well (Left/Right)
211/212 Control Cabin
500/600 Left Wing/Right Wing
730/740 Main Landing Gear and Door (Left/Right)
E.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 4(175)
