(2)
PART 2 - Amendment and distribution: Amendment & distribution procedure of the Maintenance Management Manual and the Working Procedures Manual.

(3)
PART 3 - Facilities: The description of facilities at the locations as listed in the CAAC MOC, including the layout and text description. Where the relevant facilities at the non-approved locations are used, the layout and the text description for such facilities shall also be included.

(4)
PART 4 - Personnel: The total number of personnel and the number of maintenance personnel, certifying staff and auditors involved in the approved maintenance work shall be included. The maintenance organization may update the aforementioned numbers in one year cycle if there is any change in these numbers.

(5)
PART 5 - Organization The organization chart and the description thereof that shall be able to indicate the relationships among the departments/systems.

(6)
PART 6 - Senior management personnel: The name, qualification, experience and duties and responsibilities of the Accountable Manager, Quality Manager and Production Manager.

(7)
PART 7 – Duties and Responsibilities: The description of the duties and responsibilities assigned to each department and each post.

(8)
PART 8 - Scope of work: The description of the capability to perform the maintenance work which is within the scope of approval as specified in the CAAC MOC.

(9)
PART 9 - Management requirements:

i.  The technical documents management requirements, including the management requirements for airworthiness data, worksheets as well
vi. Subcontracted items and subcontractors management requirements.
vii. Maintenance recording and reporting requirements.
viii.  The quality control requirements for the complete maintenance process from receiving of the maintenance work to the final release of that.

(10)  
PART 10 - Internal quality audit requirements.

(11)  
PART 11 - The roster of the certifying staff and samples of the    autographic signature or stamp of the certifying staff

(12)  
PART 12 - List of subcontractors and subcontracted items.

(13)  
PART 13 - Samples of the forms and tags used by the maintenance organization.

(14)  
PART 14 – The statement of compliance to this regulation.

The Working Procedures Manual shall include the following applicable subjects at least:

(1)
The basis;

(2)  
Applicability;

(3)  
The qualification for each post;

(4)  
Necessary tools/equipment and material;

(5)  
Working or operating procedures;

as basic maintenance organizations.  documents  developed  by  maintenance 
ii.  Staff training management requirements. 
iii.  Tools & equipment management requirements. 
iv.  Material management requirements. 
v.  Production control requirements. 

(6)  Working standards; 
(7)  Maintenance recording requirements; 
(8)  Samples of the forms and tags used. 

§145.31 Maintenance Criteria
The maintenance organization shall comply with the following criteria while carrying out maintenance work:
(1)  
Performing the maintenance work pursuant to the basic maintenance document which complies with the requirements, standards etc, as specified in the airworthiness data.

(2)  
The maintenance organization shall inform the operator in the case where the maintenance works that will be performed in compliance with the standards which exceed these prescribed in the airworthiness data. The data, process and instruction for such maintenance work or modification so developed shall be approved by the CAAC Headquarter Office or the CAAC RA via the operator prior to the maintenance work or modification.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：CCAR Part 145- Civil Aircraft Maintenance Organization Certi(19)