曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

electric motors. ATOS proportional valves with electronic drivers
and built in adjustable ramp were used to control the movement of
the conveyor for optimum accuracy. Finally, a remote wireless
unit with a hard wired pendant back up from LODAR was used to
provide the operator with maximum vision during use and a
secondary backup system.
REQUIREMENT: Hose Swaging Machine with a submerged Pump /
motor set delivering a dual flow to a maximum pressure of 700 bar.
The ram is designed for use up to 700 bar and has a stroke of 500mm
and the pendant control allows the operator to operate the machine
from remote areas.
REQUIREMENT: Twin pump and motor set with pumped
filtration system. This power pack has control valves for 16
independent functions and runs on Water Glycol fire resistant fluid.
REQUIREMENT: A fixed displacement pumped power pack on a
machine producing car seat slides.
This pack has a monitored Spool valve providing one channel of
safety for the machine.
Beachy Head Lighthouse
Due to erosion, Beachy Head Lighthouse was in serious danger of being lost to the sea
forever. The only way of saving this historical structure was to physically move it inland away
from the cliff edge. Abbey Underpinning were contracted for this task and immediately
contacted CFP to supply the rams and power pack. These were used to accurately control the
pull load and rate, ensuring the job was completed successfully and the lighthouse saved.
Bespoke Power pack Examples
REQUIREMENT: Pack with hours run meter for accurate
servicing intervals, control valve handle position locking,
operator pressure adjustment, diesel tank with sufficient fuel for
16 hours running and two equal flows to 100 bar.
To ensure complete customer satisfaction, it is the absolute policy of CFP Hydraulic
Systems Limited to provide design and site services that fully and consistently meet
the agreed requirements of our customers and ensure that the services comply with defined
requirements and are fit for purpose.
To demonstrate this commitment to quality to both customers and staff, it is the policy of
CFP Hydraulic Systems Limited to achieve and maintain a quality control procedure for all
aspects of the company in line with the BS EN ISO 9002 (formally BS 5750Part 2:1987)
procedure.
The Quality Policy of the Company is implemented through the operation of the Quality
Management System. The requirements of this system are mandatory for all Company
personnel and no unauthorised alterations or deviations are permitted unless expressly
authorised after review by the Senior Team and Managing Director.
A hard copy of the company quality control procedure is available to all customers and
suppliers from the main office upon request. This system is regularly reviewed and updated
to ensure continuous high standards of quality of workmanship, with regular management
reviews of projects to ensure all standards are continuously met providing a level of quality
and customer satisfaction above the industry standard.
.
Company Quality Control
Address: CFP Hydraulic Systems Ltd
Unit 24 Foxwood Rd
Sheepbridge
Chesterfield
Derbyshire
S41 9RF
Tel: 01246 450445
Fax: 01246 450033
Email: sales@cfphydraulics.co.uk
How To Contact Us
UN/CEFACT
Simple, Transparent and Effective Processes
For Global Commerce
BUSINESS REQUIREMENTS SPECIFICATION
(BRS)
Business Domain: Cross Industry – Supply Chain
Business Process: Invoicing Process
Title: Cross Industry Invoicing Process
UN/CEFACT International Trade and Business Processes Group: TBG1
Version: 2.00.05
Release: 2
TBG approval: 12-Nov-2008
Business Requirements Specification Cross Industry Invoicing Process
22-May-2009, 2.00.05 UN/CEFACT Page 2 of 45
Document Summary
Document Item Current Value
Document Title Business Requirements Specification Cross Industry Invoicing Process
Date Last Modified 22-May-2009
Current Document Version 2.00.05
Status Public Review
Document Description
(one sentence summary)
Specification that describes the business process and requirements for
the invoicing process.
Log of Changes
Version No. Date of Change Paragraphs changed Summary of Change
1.1 20-Feb-2006 First version approved by TBG Steering
Committee.
2.00.01 12-Jun-2008 All Version 2 of the Cross Industry Invoice (CII)
is based on version 1.0 and was completely
restructured according to the Supply Chain
model elaborated by TBG 1 and taking in
account requirements from TBG1 members
(e.g., GS1, UBL, US DoD, EDIFrance, Airbus)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料26(124)