Nose Landing-Gear Well
Figure 601/TASK 05-51-22-991-001
1EFF : ALL 1 05-51-22 Page 604
1 1 Feb 01/98
1 1
1CES 1
-------------------------------------------------------------------------------
|ITEM|INSP| INSPECTION TASKS |PHASE|PHASE|PHASE|INSP|REF.| | |CODE| | 1 | 2 | 3 |SIGN|FIG.| |----|----|---------------------------------------|-----|-----|-----|----|----| | | | roof-to-sidewall joint and the attach | | | | | | | | | fittings of the floor support strut. | | | | | | | | | Make sure that there are no | | | | | | | | | distortion, cracks, pulled or torn | | | | | | | | | fasteners or damaged paint. | | | | | | -------------------------------------------------------------------------------
Subtask 05-51-22-210-052
B. Inspection of the Nose Landing Gear (Ref. TASK 32-21-11-000-002)
-------------------------------------------------------------------------------|ITEM|INSP| INSPECTION TASKS |PHASE|PHASE|PHASE|INSP|REF.| | |CODE| | 1 | 2 | 3 |SIGN|FIG.| |----|----|---------------------------------------|-----|-----|-----|----|----| |1. | | Nose Landing Gear | | | | | | | | | | | | | | | | A.| | Examine the shock absorber, the | X | | | | | | | | wheels, the tires and the torque link | | | | | | | | | hinges. make sure that there is | | | | | | | | | no damage caused by the towbar or the | | | | | | | | | towbarless tractor. | | | | | | | | | NOTE : Do a special inspection of the | | | | | | | | | towing lug if you tow with a | | | | | | | | | towbar. | | | | | | | | | | | | | | | | | | If you find damage: | | | | | | | | | (1) Obey the overhaul instructions of | | X | | | | | | | the manufacturer to repair or | | | | | | | | | replace the damaged part. | | | | | | | | | | | | | | | | B.| | Examine the steering actuator. | X | | | | | | | | Make sure that there is no hydraulic | | | | | | | | | leaks or distortion on the actuator | | | | | | | | | end caps. | | | | | | | | | If you find damage: | | | | | | | | | Remove the nose landing gear | | X | | | | | | | (Ref. TASK 32-21-11-000-002) | | | | | | ------------------------------------------------------------------------------
1EFF : ALL 1 05-51-22Page 605 1 1 Feb 01/02R 1 1 1CES 1
Subtask 05-51-22-210-053
C. Leveling and measurement If you find phase 1 damage on the attachments or structure of the nose gear, measure the nose gear. Do a check of the angle to the aircraft (Ref. TASK 05-56-00-200-001).
Subtask 05-51-22-410-050
D. Close Access
(1)
Remove the warning notice(s).
(2)
Remove the access platform(s).
(3)
Make sure that the work area is clean and clear of tool(s) and other items.
(4)
Close the NLG doors (Ref. TASK 32-22-00-410-001).
Subtask 05-51-22-720-050
E. Test of the Nose Landing Gear (Ref. TASK 07-11-00-581-001) (Ref. TASK 32-30-00-867-001) (Ref. TASK 32-30-00-867-002)
-------------------------------------------------------------------------------|ITEM|INSP| INSPECTION TASKS |PHASE|PHASE|PHASE|INSP|REF.| | |CODE| | 1 | 2 | 3 |SIGN|FIG.| |----|----|---------------------------------------|-----|-----|-----|----|----| |1. | | Lift the aircraft with jacks | | | | | | | | | (Ref. TASK 07-11-00-581-001). | | | | | | | | | | | | | | | |2. | | Retract/extend the nose landing gear | | X | | | | | | | 3 times. Make sure that it moves | | | | | | | | | smoothly. Make sure that the | | | | | | | | | fittings and the structure do not | | | | | | | | | prevent the movement of the parts | | | | | | | | | that move. | | | | | | | | | (Ref. TASK 32-30-00-867-001) | | | | | | | | | (Ref. TASK 32-30-00-867-002). | | | | | | | | | NOTE: This check is necessary only | | | | | | | | | if you found damage on the | | | | | | | | | attachments of the landing gear| | | | | | | | | or the adjacent structure. | | | | | | | | | | | | | | | -------------------------------------------------------------------------------
1EFF : ALL 1 05-51-22Page 606 1 1 Feb 01/02R 1 1 1CES 1
INSPECTION AFTER NLG STEERING ANGLE EXCEEDED - INSPECTION/CHECK
_______________________________________________________________
TASK 05-51-23-200-001
Inspection after NLG Steering Angle of more than 95.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING_______ GEAR.
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 時間限制/維護檢查 2(76)
