Standby altimeter – Set
Verify that the flight instrument indications are correct.
Verify that no flags are shown.

YD651 - YD655 Integrated standby flight display ......................................................... Set Verify that the approach mode display is blank. Set the altimeter. Verify that the flight instrument indications are correct. Verify that no flags or messages are shown. Standby RMI ....................................................................................... Set Select either VOR or ADF. SPEEDBRAKE lever ........................................................DOWN detent Verify that the SPEEDBRAKE ARMED light is extinguished. Verify that the SPEEDBRAKE DO NOT ARM light is extinguished. Verify that the SPEEDBRAKE EXTENDED light is extinguished. Reverse thrust levers ...................................................................... Down Forward thrust levers.....................................................................Closed FLAP lever .......................................................................................... Set Set the flap lever to agree with the flap position. YC411, YC413 Verify that the FLAP LOAD RELIEF light is extinguished. Parking brake ...................................................................................... Set
Copyright . The Boeing Company. See title page for details.

Normal Procedures -Amplified Procedures 737 Flight Crew Operations Manual
 Verify that the parking brake warning light is illuminated Note: Do not assume that the parking brake will prevent airplane movement. Accumulator pressure can be
insufficient. Engine start levers .................................................................... CUTOFF STABILIZER TRIM cutout switches ..................................... NORMAL Radio tuning panel ...............................................................................Set
WARNING:Do not key the HF radio when the airplane is being
refueled. Injury to personnel or fire can occur.

Verify that the OFF light is extinguished. YA721 - YA809, YC411, YC413 VHF communications radios ...............................................................Set VHF NAVIGATION radios ...........................................Set for departure Audio control panel .............................................................................Set
WARNING:Do not put objects between the seat and the aisle
stand. Injury can occur when the seat is adjusted.

Seat ................................................................................................ Adjust Adjust the seat for optimum eye reference. Verify a positive horizontal (fore and aft) seat lock.
Rudder pedals ................................................................................ Adjust Adjust the rudder pedals to allow full rudder pedal and brake pedal
movement. Seat belt and shoulder harness ....................................................... Adjust Call “PREFLIGHT CHECKLIST.”
Before Start Procedure 
Start the Before Start Procedure after papers are on board. 
Flight deck door ........................................ Closed and locked  F/O 
Verify that the LOCK FAIL light is extinguished. 
Copyright . The Boeing Company. See title page for details.  September 29, 2005  NP.21.27

Normal Procedures -Amplified Procedures 737 Flight Crew Operations Manual

Do the CDU Preflight Procedure – Performance Data steps before completing this procedure. CDU display......................................................................Set C, F/O Normally the PF selects the TAKEOFF REF page. Normally the PM selects the LEGS page. N1 bugs ........................................................................Check C, F/O Verify that the N1 reference bugs are correct. IAS bugs............................................................................Set C, F/O MCP ..................................................................................Set C AUTOTHROTTLE ARM switch – ARM IAS/MACH selector – Set V2 Arm LNAV as needed. Initial heading – Set Initial altitude – Set Taxi and Takeoff briefings ..................................... Complete C, F/O The pilot who will do the takeoff does the taxi and takeoff briefings. Exterior doors ....................................................Verify closed F/O Flight deck windows ................................ Closed and locked C, F/O Start clearance ............................................................. Obtain C, F/O Obtain a clearance to pressurize the hydraulic systems. Obtain a clearance to start the engines.
If pushback is needed: Verify that the nose gear steering lockout pin is installed, or, if the nose gear steering lockout pin is not used, depressurize hydraulic system A during the hydraulic panel set step. C, F/O
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737NG機(jī)組操作手冊Flight Crew Operations Manual FCOM 1(55)