A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Close the access panels of the AC/DC emergency power center 106VU and BATTERY power center 105VU.

 (3)
 Close the access doors 812 and 822.

 (4)
 Remove the warning notice(s).

 (5)
 Remove the access platform(s).

 Subtask 24-38-51-862-051
 B. De-energize the ground service network (Ref. TASK 24-42-00-862-001).

 BATTERY (2PB1,2PB2) - INSPECTION/CHECK
______________________________________ TASK 24-38-51-280-001 Removal of the Batteries 1 and 2 for Restoration
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 243851-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 1.8 m (5 ft. 11 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-38-51-000-001 Removal of the Batteries (2PB1, 2PB2) 24-38-51-400-001 Installation of the Batteries (2PB1, 2PB2) 24-42-00-861-001 Energize the Ground Service Network from the External
 Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power CMM 243851
 3. Job Set-up
__________ Subtask 24-38-51-861-050
 A. Energize the ground service network
 (Ref. TASK 24-42-00-861-001).

 Subtask 24-38-51-010-051
 B. Get access to the Avionics Compartment
 (1)
 Put an access platform at the avionics compartment door 822.

 (2)
 Open the access door 822.

 4. Procedure
_________ Subtask 24-38-51-020-051
 A. Removal of the Batteries
 (1)
 Remove the batteries (Ref. TASK 24-38-51-000-001). Subtask 24-38-51-280-050

 B. Checking

 (1)
 Check the batteries (Ref. CMM 243851) Subtask 24-38-51-420-051

 C. Installation of the Batteries
 (1) Install the batteries (Ref. TASK 24-38-51-400-001).
 5. Close-up
________ Subtask 24-38-51-410-051
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Close the access door 822.

 (3) Remove the access platform(s). Subtask 24-38-51-862-050
 B. De-energize the ground service network
 (Ref. TASK 24-42-00-862-001).

 SHUNT - BATTERY (3PB1,3PB2) - REMOVAL/INSTALLATION
__________________________________________________
 TASK 24-38-54-000-001
 Removal of the Battery Shunt (3PB1, 3PB2)
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific warning notice
 No specific access platform 1.8 m (5 ft. 11 in.)

 B. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
24-42-00-861-001  Energize the Ground Service Network from the External Power R 24-38-54-991-001 Fig. 401
 3. Job Set-up
__________
 Subtask 24-38-54-861-050

 A. Energize the ground service network
 (Ref. TASK 24-42-00-861-001).

 Subtask 24-38-54-941-050
 B. Safety Precautions
 (1)
 In the cockpit, on the ELEC panel 35VU, release these pushbutton switches:

 -
BAT 1,

 -
BAT 2.

 (2)
 In the cockpit, on the ELEC panel 35VU, put a warning notice in position to tell persons not to operate the batteries.

 Subtask 24-38-54-010-050
 C. Get access to the Avionics Compartment
 (1)
 Put an access platform in position at the avionics compartment doors 812 and 822.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM ELECTRICAL POWER 電源2(61)