1EFF : ALL 1 24-43-55Page 407 1 1 Aug 01/00R 1 1 1CES 1

 Subtask 24-43-55-865-051
 B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------122VU ELEC/DC SVCE/BUS/ON TR2 5PX U30 124VU SVCE/601PP/602PP/SPLY 1PX BB01
 4. Procedure
_________
 **ON A/C 001-049, 051-062, 101-105, 151-152, 201-205,

 (Ref. Fig. 401/TASK 24-43-55-991-001) R **ON A/C 063-099, 106-149, 153-199, 206-299, 301-399, 401-499,
 (Ref. Fig. 401A/TASK 24-43-55-991-001-A)
 **ON A/C 001-049, 051-062, 101-105, 151-152, 201-205,

 Subtask 24-43-55-420-050
 A. Installation of the Contactor CAUTION : MAKE SURE THAT THE CONTACTOR LOCATING PIN IS CORRECTLY ENGAGED
_______ IN ITS RECESS LOCATED IN ONE POWER TERMINAL. THIS PREVENTS DAMAGE TO THE LOCATING PIN WHEN YOU APPLY THE TORQUE.
 (1)
 Put the contactor (3) in position on the two tapped barrels (6) of the contactor base (5).

 (2)
 TORQUE the two captive screws (2) to between 23.9 and 26.55 lbf.in

 (0.27 and 0.30 m.daN).

 (3)
 Remove the blanking caps from the electrical connectors.

 (4)
 Make sure that the electrical connectors are clean and in the correct condition.

 (5)
 Connect the connector (4) to the contactor (3).

R **ON A/C 063-099, 106-149, 153-199, 206-299, 301-399, 401-499,
 Subtask 24-43-55-420-050-A
 A. Installation of the Contactor CAUTION : MAKE SURE THAT THE CONTACTOR LOCATING PIN IS CORRECTLY ENGAGED
_______ IN ITS RECESS LOCATED IN ONE POWER TERMINAL. THIS PREVENTS DAMAGE TO THE LOCATING PIN WHEN YOU APPLY THE TORQUE.
 (1)
 Install the contactor (3) on the module 14PN (5).

 (2)
 TORQUE the captive screws (2) to between 23.9 and 26.55 lbf.in (0.27 and 0.30 m.daN).

 (3)
 Remove the blanking caps from the electrical connector (4) and the electrical receptacle.

 (4)
 Make sure that the electrical connectors are clean and in the correct condition.

 (5) Connect the electrical connector (4) to the contactor (3).
 **ON A/C ALL

 Subtask 24-43-55-865-052
 B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1PX, 5PX.
 Subtask 24-43-55-710-050
 C. Test of the Ground Service Network
 (1)
 Energize the ground service network
 (Ref. TASK 24-42-00-861-001).

 (2)
 On the overhead panel 25VU, put the INT LT/DOME switch in the BRT position. On the panel 453VU, the L dome light comes on.

 5. Close-up
________
 Subtask 24-43-55-862-050

 A. De-energize the ground service network
 (Ref. TASK 24-42-00-862-001).

 Subtask 24-43-55-410-050
 B. Close Access
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
R (2) Install the front panel on the bottom right side of the panel 120VU. R (3) Install the Third Occupant seat (Ref. TASK 25-11-41-400-001).
 (4)
 Remove the warning notice(s).

 (5)
 Close the access door 121AL.

 (6)
 Remove the access platform(s).

 AC ELECTRICAL LOAD DISTRIBUTION - DESCRIPTION AND OPERATION
___________________________________________________________
 1. General
_______ The AC electrical power distribution on board is carried out in several steps corresponding to:
 -
Power distribution: . from the different sources towards the main AC busbars located in panel 120VU, . then, from the main AC busbars, either directly towards important consumers (pumps, galleys...), or towards the associated distribution sub-busbars located in the circuit breaker panels.

 -
Power distribution from sub-busbars: . the distribution from these sub-busbars towards the different AC consumers.

 This chapter deals only with power distribution. The referenced figure gives a schematic summary of the whole AC distribution on board:
 **ON A/C 001-049, 051-060, 101-102, 201-201,
 (Ref. Fig. 001)
 **ON A/C 061-099, 103-105, 151-158, 202-209,
 (Ref. Fig. 001A)
R **ON A/C 106-149, 229-299, 301-399,
 (Ref. Fig. 001B)
 **ON A/C 159-199, 210-228,
 (Ref. Fig. 001C)
R **ON A/C 401-499,
 (Ref. Fig. 001D) **ON A/C ALL

 This can be broken down as follows:
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM ELECTRICAL POWER 電源2(99)