1EFF : ALL 1 28-46-17Page 401 1 1 May 01/05R 1 1 1CES 1

 B. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
28-10-00-910-001 Safety Procedures When You Do Work in a Fuel Tank 28-10-00-910-002 Access to the Fuel Tanks and the Work Areas 28-25-00-650-001 Pressure Defuel 28-25-00-650-003 To Drain Remaining Fuel from the Wing Tanks and the
 Center Tank
 57-27-11-000-001  Removal of the Access Panel (540AB, 540BB, 540CB, 540DB, 540EB, 540FB, 540GB, 640AB, 640BB, 640CB, 640DB, 640EB, 640FB, 640GB)

R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 28-46-17-991-001 Fig. 401
 **ON A/C 301-399,

 28-46-17-991-001-A Fig. 401A
 **ON A/C ALL

 3. Job Set-up
__________
 Subtask 28-46-17-941-054

 A. Safety Precautions WARNING : OBEY THE SAFETY PROCEDURES WHEN YOU DO WORK IN A FUEL TANK.
_______
 (1)
 You must obey the fuel safety procedures (Ref. TASK 28-10-00-910-001) when you do work in a fuel tank

 (2)
 Put the safety barriers in position.

 1EFF : ALL 1 28-46-17Page 402 1 1 Aug 01/05 1 1 1CES 1 Subtask 28-46-17-650-050

 B. Fuel Configuration
 (1)
 Defuel the applicable fuel tank (Ref. TASK 28-25-00-650-001).

 (2)
 Drain the remaining fuel from the applicable fuel tank (Ref. TASK 28-25-00-650-003).

 Subtask 28-46-17-865-050
 C. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
 -------------------------------------------------------------------------------

R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 121VU FUEL/CTR TK/PUMPS1 AND 2/CTL AND IND 32QA R26
 121VU FUEL/CTR TK/PUMPS1 AND 2/CTL AND IND 31QA R25
 **ON A/C ALL
 121VU FUEL/PUMPS/2/R CTL AND L IND 10QA R29
 121VU FUEL/PUMPS/1/L CTL AND R IND 3QA R23
 **ON A/C 301-399,
 121VU FUEL/CTR TK/AUTO/CTL 3QL R27 121VU FUEL/CTR TK/L&R XFR/CTL & IND 2QL R26 121VU FUEL/CTR TK/L&R XFR/CTL & IND 1QL R25
 1EFF : ALL 1 28-46-17Page 403 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL

 Subtask 28-46-17-010-050
 D. Get Access
 (1)
 Put the access platform in position below the applicable access panel 540AB (640AB).

 (2)
 Remove the applicable access panel 540AB (640AB) (Ref. TASK 28-10-00-910-002), (Ref. TASK 57-27-11-000-001):

 -
FOR 29QJ1
 remove 540AB

 -
FOR 29QJ2
 remove 640AB.

 4. Procedure
_________ R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 (Ref. Fig. 401/TASK 28-46-17-991-001)
 **ON A/C 301-399,

 (Ref. Fig. 401A/TASK 28-46-17-991-001-A)
 **ON A/C ALL

 Subtask 28-46-17-020-050
 A. Removal of the Temperature Sensor 29QJ1 (29QJ2)
 (1)
 Loosen the cable clamp screw (8) and release the cable (1).

 (2)
 Loosen the electrical connector screws (4) and remove the cable (1).

 (3)
 Put blanking caps on the disconnected electrical connectors.

 (4)
 Remove the bolts (3) and (5) and the washers (2) and (6). Remove the sensor (7) from the support bracket assembly.

 1EFF : ALL 1 28-46-17Page 404 1 1 Aug 01/05 1 1 1CES 1

 Temperature Sensor
 Figure 401/TASK 28-46-17-991-001

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-46-17Page 405 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1

R  Temperature Sensor 
R  Figure 401A/TASK 28-46-17-991-001-A 
R 1EFF :  301-399,  1  28-46-17 Page 406 
1  1  May 01/04
 1  1
 1CES  1

 TASK 28-46-17-400-001
 Installation of the Temperature Sensor 29QJ1 (29QJ2)
 WARNING : MAKE SURE THAT THE FLIGHT CONTROL SAFETY-LOCKS AND THE WARNING
_______
 NOTICES ARE IN POSITION.

 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUEL 燃油6(91)