__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers No specific warning notice No specific access platform, adjustable 4.0 m (13 ft. 1 in.)
1EFF : ALL 1 30-11-00Page 508 1 1 Nov 01/04R 1 1 1CES 1
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 19-010 USA AMS 5687
LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA
(Ref. 20-31-00)
FOR FIN 9DL
Material No. 19-010 USA AMS 5687
LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA
(Ref. 20-31-00)
FOR FIN 10DL
Material No. 19-010 USA AMS 5687
LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA
(Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
from the External Power 27-80-00-866-004 Extending the Slats on the Ground 27-80-00-866-005 Retracting the Slats on the Ground 32-00-00-481-001 Installation of the Safety Devices on the Landing
Gears 30-11-42-000-001 Removal of the Anti-Ice Duct (for corrective action) 30-11-42-400-001 Installation of the Anti-Ice Duct (for corrective
action)
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
30-11-00-991-006 Fig. 502
**ON A/C 301-399,
30-11-00-991-006-A Fig. 502A **ON A/C ALL
3. Job Set-up
__________ R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
(Ref. Fig. 502/TASK 30-11-00-991-006)
**ON A/C 301-399,
(Ref. Fig. 502A/TASK 30-11-00-991-006-A)
**ON A/C ALL
Subtask 30-11-00-941-068
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Make sure that the ground safety locks are on the landing gear (Ref. TASK 32-00-00-481-001).
(3)
Put a warning notice in the cockpit to tell persons not to operate the flight controls.
Subtask 30-11-00-860-051
B. Aircraft Maintenance Configuration
(1)
Fully extend the slats (Ref. TASK 27-80-00-866-004).
(2)
Make sure that the LOCKING TOOL - FLAP/SLAT CONTROL LEVER (98D27803000000) is on the slat/flap control lever.
Wing Anti-Ice Control Valve - Location and Detail
Figure 502/TASK 30-11-00-991-006
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 30-11-00Page 511 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
Wing Anti-Ice Control Valve - Location and Detail Figure 502A/TASK 30-11-00-991-006-A
R 1EFF : 301-399, 1 30-11-00Page 512 1 1 May 01/05 1 1 1CES 1 Subtask 30-11-00-010-063
C. Get Access
(1)
Put an access platform, adjustable in position at the applicable zone 520(620).
(2)
Remove the applicable leading edge access panels:
-522AB, 522CB, 622AB, 622CB.
4. Procedure
_________ R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 30-11-00-860-053
A. Preparation for Test
(1)
Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002).
(2)
Open the wing anti-ice control valve:
(a)
Move the indicator (2) to the OPEN position.
(b)
Remove and discard the lockwire from the screw (1).
(c)
Remove the screw (1) and install it in the end of the indicator
(2) to lock it in the OPEN position. 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320飛機維護手冊 AMM ICE AND RAIN PROTECTION 防冰和排雨1(36)
