(17)
 Remove and discard the cotter pin (42). Remove the nut (40), the washer (41) and the screw (44). Remove the lever (43).

 1EFF : ALL 1 32-31-14Page 405 1 1 Feb 01/98 1 1 1CES 1 TASK 32-31-14-400-001

 Installation of the NLG Door Uplock Assy (2534GM)
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific safety barriers
 No specific warning notice(s)
 No specific access platform 2.06 m (6 ft. 9 in.)
 No specific container 5 l (1.3208 USgal)

R No specific  Torque Wrench : range 0.00 to 1.20 m.daN
R (0.00 to 9.00 lbf.ft) No specific Torque Wrench : range 0.20 to 3.60 m.daN
 (2.00 to 26.00 lbf.ft) 98A27901002000 1 PIN, RIGGING - RUDDER CONTROL 98A32301000000 1 RIGGING PIN 98D32203502000 2 SAFETY PIN - NLG DOOR
 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
No specific  lockwire corrosion resistant steel 0.8 mm (0.03 in.)
 Material No. 04-004  USA MIL-PRF-23827 TYPE I
 SYNTH.ESTER BASED GREASE HIGH PRESSURE
 (Ref. 20-31-00)

 Material No. 04-022  USA MIL-PRF-81322 GRADE 2
 SYNTHE.HYDROCARBON GREASE HIGH PRESSURE
 (Ref. 20-31-00)

 Material No. 05-005D  USA MIL-C-16173 GRADE II
 CORROSION PREVENTIVE (OBSOLETE USE 15-007)
 (Ref. 20-31-00)

 Material No. 09-013  USA MIL-PRF-81733 TYPE I CLASS A
 CORROSION INHIBITING BRUSH CONSISTENCY
 (Ref. 20-31-00)

 1EFF : ALL 1 32-31-14Page 406 1 1 May 01/05 1 1 1CES 1 1EFF : ALL 1 32-31-14Page 407 1 1 May 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
Material No. 11-002  USA MIL-PRF-680 DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT) (Ref. 20-31-00)
 C. Expendable Parts
 -------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
6 17 26 30 35 42  cotter pin cotter pin cotter pin cotter pin lockwasher cotter pin  32-33-01 08 -01032-31-01 05 -01032-31-01 09 -01032-33-01 08 -29032-31-01 14 -25532-31-01 09 -010
 D. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
R R R R  12-12-29-611-001 29-00-00-864-001 29-10-00-863-001 29-10-00-864-001 29-14-00-614-001 32-00-00-860-001 32-00-00-860-002 32-22-00-010-001 32-22-00-410-001 32-31-00-710-002 32-31-14-991-001  Fill the Hydraulic Fluid Reservoir with a Hand PumpPut the Related Hydraulic System in the Depressurized Configuration before Maintenance ActionPressurize the Green Hydraulic SystemDepressurize the Green Hydraulic SystemDepressurization of the Hydraulic Reservoirs Flight Configuration Precautions with Electrical Power Ground Configuration after Flight Configuration with Electrical PowerNose Gear Doors - Ground Doors OpeningNose Gear Doors - Ground Doors ClosingOperational Test of the Landing Gear DoorsFig. 401

 3. Job Set-up
__________
 Subtask 32-31-14-860-052
 A. Aircraft Maintenance Configuration
 (1)
 Make sure that the Green hydraulic system is depressurized and put it in the maintenance configuration. (Ref. TASK 29-00-00-864-001)

 (2)
 Make sure that the reservoir of the Green hydraulic system is depressurized (Ref. TASK 29-14-00-614-001).

 (3)
 In the cockpit, on the panel 400VU, make sure that the warning notice(s) is (are) in position to tell persons not to operate the landing gear control lever.

 (4)
 Make sure that the warning notice(s) is (are) in position to tell persons not to pressurize the Green hydraulic system: - on the panel 40VU in the cockpit, - on the ground service panel of the Green hydraulic system, access

 door (197CB).

 (5)
 Make sure that the safety barriers are in position.

 (6)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架4(108)