曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R R  WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING_______ GEAR.
 1. Reason for the Job__________________
R R  This task gives an alternative method to do an operational test of the landing gear doors. This method uses the MCDU to simulate flight. Also, it is not necessary to install false targets on the weight-on-wheels proximity sensors.
 2. Job Set-up Information______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific No specific No specific  safety barrierswarning noticewarning notices
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R R R  24-41-00-861-002 24-41-00-861-002 24-41-00-862-002 24-41-00-862-002  Energize the Aircraft Electrical Circuits from the External Power Energize the Aircraft Electrical Circuits from the APUDe-energize the Aircraft Electrical Circuits Supplied from the External Power De-energize the Aircraft Electrical Circuits Supplied from the APU

 1EFF : ALL 1 32-31-00Page 590 1 1 May 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-10-00-863-001 Pressurize the Green Hydraulic System 29-10-00-864-001 Depressurize the Green Hydraulic System 31-32-00-860-009 Procedure to Get Access to the SYSTEM REPORT/TEST/L/G
 Page 32-00-00-481-001 Installation of the Safety Devices on the Landing Gears 32-00-00-860-001 Flight Configuration Precautions with Electrical Power 32-00-00-860-002 Ground Configuration after Flight Configuration with Electrical Power
 3. Job Set-up
__________
 Subtask 32-31-00-941-083
 A. Put the safety barriers in position.
 (1)
 Put the safety barriers in position.

 (2)
 On the panel 400VU:

 -make sure that the landing-gear control-lever 6GA is in the DOWN position
 -put a warning notice in position to tell persons not to operate the landing gear.

 (3)
 Make sure that the safety locks are in position on the landing gear (Ref. TASK 32-00-00-481-001).

 (4)
 Put warning notices adjacent to the landing gear doors to tell persons not to go near the landing gear doors.

 Subtask 32-31-00-869-107
R B. Flight Configuration Precautions
R (1) Do the flight configuration precautions with electrical power R (Ref. TASK 32-00-00-860-001).
 1EFF : ALL 1 32-31-00Page 591 1 1 May 01/05 1 1 1CES 1 1EFF : ALL 1 32-31-00Page 592 1 1 May 01/05 1 1 1CES 1

 Subtask 32-31-00-865-096
 C. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU COM NAV/RAD ALTM/2 1SA2 K12 121VU COM NAV/RAD ALTM/1 1SA1 K11
 Subtask 32-31-00-860-089
 D. Aircraft Maintenance Configuration
 WARNING : MAKE SURE THAT THE CONTROLS AGREE WITH THE POSITION OF THE_______ ITEMS THEY OPERATE BEFORE YOU PRESSURIZE A HYDRAULIC SYSTEM.
 (1) Pressurize the Green hydraulic system (Ref. TASK 29-10-00-863-001). 
R R  NOTE : You can energize the aircraft electrical circuits from an____ external source or from the APU as necessary. 
R R  (2) If you energize the electrical circuits from an external source, do the procedure (Ref. TASK 24-41-00-861-002). 
R R  (3) If you energize the electrical circuits from the APU, do the procedure (Ref. TASK 24-41-00-861-002). 
R R  (4) Set the ADIRU 1 or 3 to ON. 
R  (5) Make sure that: - the landing gear doors are closed - the landing-gear-door ground-control handles are in the CLOSED position - the landing-gear control-lever 6GA is in the DOWN position. 
R R  (6) On panel 20VU, set the applicable ADIRS IR1/IR2/IR3 switch to the NAV position.

 

 4. Procedure
_________ Subtask 32-31-00-710-060
 A. Operational Test of the Landing Gear Doors
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
 Get access to the SYSTEM REPORT/TEST/L/G page on the MCDU (Ref. TASK 31-32-00-860-009).
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架4(83)