5. Close-up
________ Subtask 32-31-00-410-051
 A. Close Access
 (1) Close the MLG doors (Ref. TASK 32-12-00-410-001).
 (2) Close the NLG doors (Ref. TASK 32-22-00-410-001). Subtask 32-31-00-942-052
 B. Removal of Equipment
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the safety barriers.

 (3)
 Remove the warning notice(s).

 (4)
 Remove the access platform(s).

 (5)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 1EFF : ALL 1 32-31-00Page 607 1 1 Nov 01/02R 1 1 1CES 1

 LEVER - LANDING GEAR NORMAL CONTROL (6GA) - REMOVAL/INSTALLATION
________________________________________________________________ TASK 32-31-11-000-001 Removal of the Landing Gear Normal Control lever (6GA)
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps
 No specific circuit breaker(s) safety clip(s)

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
32-00-00-860-001 Flight Configuration Precautions 32-31-11-991-001 Fig. 401
 3. Job Set-up
__________ Subtask 32-31-11-860-050
 A. Aircraft Maintenance Configuration
 (1) Obey the applicable safety precautions before you open the LGCIU circuit breakers (Ref. TASK 32-00-00-860-001).
 1EFF : ALL 1 32-31-11Page 401 1 1 Feb 01/98 1 1 1CES 1 1EFF : ALL 1 32-31-11Page 402 1 1 Aug 01/99 1 1 1CES 1

R  Subtask 32-31-11-865-055 
R  B. Open, safety and tag this(these) circuit breaker(s): 
R R R R R R  -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU L/G/LGCIU/SYS1/NORM 1GA C09 121VU HYDRAULIC/LGCIU/SYS2 2GA Q35 121VU HYDRAULIC/LGCIU/SYS1/GRND SPLY 52GA Q34
 Subtask 32-31-11-010-050
 C. Remove the thermoformed cover from the center instrument panel.
 4. Procedure_________
 (Ref. Fig. 401/TASK 32-31-11-991-001)
 Subtask 32-31-11-020-050
 A. Removal of the L/G Control Lever
 (1) Loosen the two screws (3). Do not remove them.
 (2) Pull the L/G control lever (4) from its housing.
 (3) Disconnect the electrical connectors (1) and (2) from the L/G control lever (4).
 (4) Remove the L/G control lever (4).
 (5) Put blanking caps on the disconnected electrical connectors.

 Landing Gear Normal Control Lever
 Figure 401/TASK 32-31-11-991-001
 1EFF :  ALL  1  32-31-11 Page 403 
1  1  Feb 01/98
 1  1
 1CES  1

 TASK 32-31-11-400-001
 Installation of the Landing Gear Normal Control Lever (6GA)
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-10-00-864-001 Depressurize the Green Hydraulic System 32-00-00-481-001 Installation of the Safety Devices on the Landing
 Gears 32-00-00-860-001 Flight Configuration Precautions 32-00-00-860-002 Ground Configuration after Flight Configuration 32-31-00-720-002 Functional Test of the Normal Extension and
 Retraction of the Landing Gear 32-42-00-710-001 Operational Test of the Normal Braking System 32-69-00-740-001 BITE Test of the Landing Gear 32-69-00-860-001 Simulation of Flight, with the Aircraft on the Ground 32-31-11-991-001 Fig. 401
 3. Job Set-up
__________
 Subtask 32-31-11-860-051
 A. Aircraft Maintenance Configuration
 (1) Make sure that you obeyed the flight configuration precautions (Ref. TASK 32-00-00-860-001).
 1EFF : ALL 1 32-31-11Page 404 1 1 Feb 01/98 1 1 1CES 1 1EFF : ALL 1 32-31-11Page 405 1 1 Aug 01/99 1 1 1CES 1 Subtask 32-31-11-941-050
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架4(99)