(2)
 With the lavatory doors unlocked, the electrical supply flows through the lavatory microswitches to the FREE terminal of each sign. The sign pictogram/legends come on green to show that the lavatories are not occupied.

 (3)
 When the lavatory doors are closed and locked, the contacts of the microswitches change over and remove the electrical supply from the FREE terminal to the ENGAGED terminal of the related sign. The sign pictogram/legends change to red to show that the related lavatory is occupied.

 **ON A/C 301-399,
 B. Rear Lavatory Occupied-Signs
 (Ref. Fig. 002B)

 (1)
 The rear lavatory occupied-sign 13WJ shows the positions of the two rear lavatories D and L on the left side. It also shows if the two lavatories are occupied or not occupied. The sign is installed in a position where it can be seen easily.

 (a)
 The 28VDC normal busbar 208PP energizes the sign 13WJ through the circuit breaker 11WJ and the relay 1. The door microswitches of the lavatories D and L and the relay 2 energize the relay 1. The two relays are installed in the lavatory L. One microswitch is installed in the door frame of each of the lavatories D and L.

 (b)
 With one or the two doors of these lavatories unlocked, the relays cause the electrical supply to energize the FREE terminal of the sign 13WJ. The sign pictogram/legend comes on green to show that at least one of these lavatories is not occupied.

 (c)
 When the door of each of the lavatories D and L is closed and locked, the electrical supply energizes the two relays. The relay 1 removes the electrical supply from the FREE terminal of the sign 13WJ and supplies it to the ENGAGED terminal. The sign pictogram/legend changes to red and shows that the two lavatories are occupied.

 (2)
 The rear lavatory occupied-sign 14WJ shows the position of the rear lavatory E on the right side. It also shows if this lavatory is occupied or not occupied. The sign is installed in a position where it can be seen easily.

 (a) The 28VDC normal busbar 208PP energizes the sign 14WJ through the circuit breaker 11WJ and the microswitch of the lavatory E. The microswitch is installed in the door frame of this lavatory.
 (b) With the door of the lavatory E unlocked, electrical supply flows to the FREE terminal of the sign 14WJ. The sign pictogram/legend comes on green to show that this lavatory is not occupied.
 (c) When the door of the lavatory E is closed and locked, the microswitch contacts change over. The microswitch removes the electrical supply from the FREE terminal to the ENGAGED terminal of the sign 14WJ. The sign pictogram/legend changes to red and shows that this lavatory is occupied.
 (3) Not Applicable 
R  **ON A/C 401-499, 
R R R R R R  B. Rear Lavatory Occupied-Sign (Ref. Fig. 002C) The rear lavatory occupied-sign 13WJ shows the positions of the two rear lavatories. It also shows if both lavatories are occupied or not occupied. The sign is installed in a position where it can be easily seen. 
R R R  (1) The 28VDC normal busbar 208PP energizes the sign through the circuit breaker 11WJ (relay 8WJ) and the door microswitches. One microswitch is installed in the door frame of each rear lavatory. 
R R R R  (2) With one or more lavatory doors unlocked, the electrical supply flows through the relay 8WJ to the FREE terminal of the sign. The sign pictogram/legend comes on green to show that at least one of the lavatories is not occupied. 
R R R R R R R  (3) When the door of each lavatory is closed and locked, the electrical supply energizes the relay 5WJ. The electrical supply then energize the relay 8WJ through the closed contacts of the relay 5WJ. The relay contacts change over, removes the electrical supply from the FREE terminal of the sign and supplies it to the ENGAGED terminal. The sign pictogram/legend changes to red to show that both lavatories are occupied.

 LAVATORY LIGHTED SIGNS - ADJUSTMENT/TEST
________________________________________
 TASK 33-26-00-710-001
 Operational Test of the Lavatory Lighted Signs WJ

 1.
 Reason for the Job

__________________
 To make sure that the lavatory lighted signs operate correctly.

 2.
 Job Set-up Information

______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002  Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM LIGHTS 燈光1(84)