(2) If the EXT PWR/NOT IN USE indicator light (8XG) stays off:
- replace the lamp of the EXT PWR/NOT IN USE indicator light (8XG).
(a) If the fault continues:
- do a check of the wiring (Ref. ASM 24-41/01) between: . pins 4 and 1 of the EXT PWR/NOT IN USE indicator light (8XG) . pin 5 of the EXT PWR/NOT IN USE indicator light (8XG) and the first terminal.
1 If there is no continuity:
_ - repair the wiring.
2 If there is continuity:
_ - replace the IND LT-EXT PWR/NOT IN USE (8XG).
R **ON A/C 401-499,
R A. If the test confirms the fault:
R - on the external power panel 108VU, push the LIGHT TEST pushbutton
R switch (34LP) to do a test of the lights of the external power panel
R 108VU.
R (1) If the EXT PWR/NOT IN USE indicator light comes on:
R - do a check of the wiring between the pin 2 of the circuit breaker
R (6XG) and the pin 2 of the EXT PWR/NOT IN USE indicator light (8XG)
R (Ref. ASM 24-41/01).
R (a) If there is no continuity:
R - repair the wiring.
R (b) If there is continuity:
R - replace the IND LT-EXT PWR/NOT IN USE (8XG).
R 1_ If the fault continues:
R - replace the CNTOR-AC GND SVCE SPLY (12XX) (Ref. AMM TASK 24-
R 42-55-000-001) and (Ref. AMM TASK 24-42-55-400-001).
R 2_ If the fault continues:
R - replace the EPC (3XG) (Ref. AMM TASK 24-41-55-000-001) and
R (Ref. AMM TASK 24-41-55-400-001).
R 3_ If the fault continues:
R - replace the GAPCU (24XG) (Ref. AMM TASK 24-41-34-000-001)
R and (Ref. AMM TASK 24-41-34-400-001).
R 4_ If the fault continues:
R - replace the P/BSW-ELEC/EXT PWR (10XG).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞24-40-00∞∞∞∞∞∞∞∞∞∞Page 221
Aug 01/05 CES
R a If the fault continues:_
R - do a check and repair the wiring (Ref. ASM 24-41/01)
R between:
R . pin A/X2 of the EPC auxiliary control relay (5XG) and
R pin AB/10A of the GAPCU (24XG)
R . pin AA/4A of the GAPCU (24XG) and pin A/B1 of the
R ELEC/EXT PWR pushbutton switch (10XG)
R . pin A/B3 of the ELEC/EXT PWR pushbutton switch (10XG)
R and the ground.
R (2) If the EXT PWR/NOT IN USE indicator light (8XG) stays off:
R - replace the lamp of the EXT PWR/NOT IN USE indicator light (8XG).
R (a) If the fault continues:
R - do a check of the wiring (Ref. ASM 24-41/01) between:
R . pins 4 and 1 of the EXT PWR/NOT IN USE indicator light (8XG)
R . pin 5 of the EXT PWR/NOT IN USE indicator light (8XG) and the
R first terminal.
R 1 If there is no continuity:_
R - repair the wiring.
R 2 If there is continuity:_
R - replace the IND LT-EXT PWR/NOT IN USE (8XG).
R **ON A/C ALL
B. Do this test to make sure that the system operates correctly.
(1) Do the test given in Para. 3. and make sure that:
- on the external power panel 108VU the EXT PWR/NOT IN USE indicator
light and EXT PWR/AVAIL caution light come on.
- on the ELEC panel 35VU, the AVAIL legend of the EXT PWR pushbutton
switch comes on.
(2) De-energize the aircraft electrical circuits from the external power
(Ref. AMM TASK 24-41-00-862-002).
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
TASK 24-40-00-810-810 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 電源 3(90)
