(2) At the ELAC2 receptacle, do a check of the resistance between pin AA/7G and pin AD/10C (Ref. ASM 27-93/03).

 NOTE : The resistance must be between 40 and 100 Ohms.
____

 (a) If the resistance is less than 40 Ohms:
 - at the inboard aileron servocontrol (33CE1), do a check of the resistance of the solenoid valve between pin A/H and pin A/T (Ref. ASM 27-93/03).
 NOTE : The resistance must be between 40 and 100 Ohms.
____

 1 If the resistance values are out of the specified limits:
_ a Replace the solenoid valve of the servo control (33CE1),

_ (Ref. AMM TASK 27-14-51-000-004) and (Ref. AMM TASK 27-14-51-400-004).
 b_  Do again a check of the resistance of the solenoid valve
R  between pin A/H and pin A/T of the inboard aileron 
R  servocontrol (33CE1) (40 to 100 Ohms).
 - If the resistance values are out of the specified limits:
 . Replace the SERVO CTL-L AILERON, INBD G (33CE1) (Ref.
 AMM TASK 27-14-51-000-001) and (Ref. AMM TASK 27-14-51-
400-001).

 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞27-10-00∞∞∞∞∞∞∞∞∞∞Page 233
 Aug 01/00 CES

 . Replace the ELAC-2 (2CE2) (Ref. AMM TASK 27-93-34-000-
001) (Ref. AMM TASK 27-93-34-400-001).
 - If the resistance values are in the specified limits: 
R  . Replace the ELAC-2 (2CE2) (Ref. AMM TASK 27-93-34-000-
R  001) (Ref. AMM TASK 27-93-34-400-001).

 2 If the resistance values are in the specified limits:
_ a Repair the wiring of the SOL VLV signal from the servo

_ control (33CE1) to the ELAC2 (2CE2), (Ref. ASM 27-93/03).
R b_ Replace the ELAC-2 (2CE2) (Ref. AMM TASK 27-93-34-000-001)R and (Ref. AMM TASK 27-93-34-400-001).
 (b) If the resistance is more than 100 Ohms:
 - at the inboard aileron servocontrol (33CE1), do a check of the resistance of the solenoid valve between pin A/H and pin A/T (Ref. ASM 27-93/03).
 NOTE : The resistance must be between 40 and 100 Ohms.
____

 1 If the resistance values are out of the specified limits:
_

R a_ Replace the solenoid valve of the servo control (33CE1)R (Ref. AMM TASK 27-14-51-000-004) and (Ref. AMM TASK 27-14-51-400-004).
 b Do again a check of the resistance of the solenoid valve
_ R between pin A/H and pin A/T of the intboard aileron R servocontrol (33CE1) (40 to 100 Ohms).
 - If the resistance values are out of the specified limits: . Replace the SERVO CTL-L AILERON, INBD G (33CE1) (Ref. AMM TASK 27-14-51-000-001) and (Ref. AMM TASK 27-14-51-400-001). . Install the ELAC2 (Ref. AMM TASK 27-93-34-400-001).

 - If the resistance values are in the specified limits: Install the ELAC2 (Ref. AMM TASK 27-93-34-400-001).

 2 If the resistance values are in the specified limits:
_

R a_ Repair the wiring of the SOL VLV signal from the servoR control (33CE1) to the ELAC2 (2CE2) (Ref. ASM 27-93/03).
 b Install the ELAC2 (Ref. AMM TASK 27-93-34-400-001).
_

 (c) If the resistance values are in the specified limits: R - see para. (3).
R (3) At the ELAC2 receptacle, do a check of the insulation between pin R AA/7G (pin AD/10C) and the ground.
R NOTE : The resistance must be more than 100 Megohms.
____

 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞27-10-00∞∞∞∞∞∞∞∞∞∞Page 234
 Aug 01/00 CES

R (a) If the resistance is more than 100 Megohms:
R - replace the ELAC-2 (2CE2) (Ref. AMM TASK 27-93-34-000-001) and
R (Ref. AMM TASK 27-93-34-400-001).

R  1_  If the fault continues:
R  - replace the solenoid valve (Ref. AMM TASK 27-14-51-000-004) 
R  and (Ref. AMM TASK 27-14-51-400-004). 

R 2_ If the fault continues:
R - replace the SERVO CTL-L AILERON, INBD G (33CE1) (Ref. AMM
R TASK 27-14-51-000-001) and (Ref. AMM TASK 27-14-51-400-001).

R 3_ If the fault continues:
R - do a check of the wiring from the ELAC-2 (2CE2) MON part
R from pin AE/14G to the first terminal block
R - do a check and repair the wiring from the ELAC-2 (2CE2) COM
R part from pin AA/6G to the ground.

R (b) If the resistance is less than 100 Megohms:
R - at the SERVO CTL-L AILERON, INBD G (33CE1), do a check of the
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 飛行操縱 1(12)