_
- replace the solenoid valve (Ref. AMM TASK 27-14-51-000-004) and (Ref. AMM TASK 27-14-51-400-004).
2 If the fault continues:
_
- replace the SERVO CTL-R AILERON, INBD G (33CE2) (Ref. AMM TASK 27-14-51-000-001) and (Ref. AMM TASK 27-14-51-400-001).
3 If the fault continues:
_
- Do a check of the wiring from the ELAC-1 (2CE1) MON part from pin AE/14E to the first terminal block.
- Do a check and repair the wiring from the ELAC-1 (2CE1) COM part from pin AA/6J to the ground.
(b) If the resistance is less than 100 Megohms:
- at the SERVO CTL-R AILERON, INBD G (33CE2), do a check of the insulation of the solenoid valve between pin A/H (pin A/T) and the ground.
1 If the resistance is less than 100 Megohms:
_
- replace the solenoid valve (Ref. AMM TASK 27-14-51-000-004) and (Ref. AMM TASK 27-14-51-400-004).
a do again a check of the insulation of the solenoid valve
_ between pin A/H (pin A/T) and the ground.
- If the resistance is less than 100 Megohms: . Replace the SERVO CTL-R AILERON, INBD G (33CE2) (Ref. AMM TASK 27-14-51-000-001) and (Ref. AMM TASK 27-14-51-400-001). . Replace the ELAC-1 (2CE1) (Ref. AMM TASK 27-93-34-000-001) and (Ref. AMM TASK 27-93-34-400-001).
2 If the resistance is more tahn 100 Megohms:
_ a Repair the wiring of the solenoid valve signal from the
_ SERVO CTL-R AILERON, INBD G (33CE2) to the ELAC-1 (2CE1).
b Replace the ELAC-1 (2CE1) (Ref. AMM TASK 27-93-34-000-001)
_ and (Ref. AMM TASK 27-93-34-400-001).
R **ON A/C 301-399,
R A. If the test confirms the fault:
R - Remove the ELAC1 (Ref. AMM TASK 27-93-34-000-001).
R (1) At the ELAC1 receptacle, do a check of the resistance between pin
R AA/7J and pin AD/10A (Ref. ASM 27-93/02).
R NOTE : The resistance must be between 40 and 100 Ohms.
____
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞27-10-00∞∞∞∞∞∞∞∞∞∞Page 252
May 01/04 CES
R (a) If the resistance is less than 40 Ohms:
R - at the inboard aileron servocontrol (33CE2), do a check of the
R resistance of the solenoid valve between pin A/H and pin A/T
R (Ref. ASM 27-93/02).
R NOTE : The resistance must be between 40 and 100 Ohms.
____
R 1_ If the resistance values are out of the specified limits:
R a_ Replace the solenoid valve of the servo control (33CE2),
R (Ref. AMM TASK 27-14-51-000-004) and (Ref. AMM TASK 27-14-R 51-400-004).
R b_ Do again a check of the resistance of the solenoid valve
R between pin A/H and pin A/T of the inboard aileron
R servocontrol (33CE2) (40 to 100 Ohms).
R - If the resistance values are out of the specified limits:
R . Replace the SERVO CTL-R AILERON, INBD G (33CE2) (Ref.
R AMM TASK 27-14-51-000-001) and (Ref. AMM TASK 27-14-51-R 400-001).
R . Replace the ELAC-1 (2CE1) (Ref. AMM TASK 27-93-34-000-R 001) (Ref. AMM TASK 27-93-34-400-001).
R - If the resistance values are in the specified limits:
R . Replace the ELAC-1 (2CE1) (Ref. AMM TASK 27-93-34-000-R 001) (Ref. AMM TASK 27-93-34-400-001).
R 2_ If the resistance values are in the specified limits:
R a_ Repair the wiring of the SOL VLV signal from the servo
R control (33CE2) to the ELAC1 (2CE1) (Ref. ASM 27-93/02).
R b_ Replace the ELAC-1 (2CE1) (Ref. AMM TASK 27-93-34-000-001)
R and (Ref. AMM TASK 27-93-34-400-001).
R (b) If the resistance is more than 100 Ohms:
R - at the inboard aileron servocontrol (33CE2), do a check of the
R resistance of the solenoid valve between pin A/H and pin A/T
R (Ref. ASM 27-93/02).
R NOTE : The resistance must be between 40 and 100 Ohms.
____
R 1_ If the resistance values are out of the specified limits:
R a_ Replace the solenoid valve of the servo control (33CE2)
R (Ref. AMM TASK 27-14-51-000-004) and (Ref. AMM TASK 27-14-R 51-400-004).
R b_ Do again a check of the resistance of the solenoid valve
R between pin A/H and pin A/T of the inboard aileron
R servocontrol (33CE2) (40 to 100 Ohms).
R - If the resistance values are out of the specified limits:
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 301-399, ∞∞27-10-00∞∞∞∞∞∞∞∞∞∞Page 253 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 飛行操縱 1(19)
