- do the test given in Para. 3.
If you do not find any defect, continue the trouble shooting.
(5) If the fault continues:
(a) Do a check of the wiring of the DSO 07 signal from the ELAC1 (2CE1) COM part and MON part to the FMGC1 (1CA1) (Ref. ASM 27-92/44)
- if there is continuity see Para. (b)
- if there is no continuity repair the above wiring.
(b) Do a check of the wiring of the DSI 07 signal from the ELAC1 (2CE1) COM part and MON part to the FMGC1 (1CA1) (Ref. ASM 27-92/44), (Ref. ASM 22-85/03).
- if there is continuity see Para. (c)
- if there is no continuity repair the above wiring.
(c) Do a check of the wiring of the DSI 13 signal from the ELAC1 (2CE1) COM part and MON part to the FMGC1 (1CA1) (Ref. ASM 27-92/44), (Ref. ASM 22-85/03).
- if there is continuity see Para. (5)
- if there is no continuity repair the above wiring.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 051-099, 101-105, 151-199, ∞∞27-93-00∞∞∞∞∞∞∞∞∞∞Page B266
201-214, Aug 01/05 CES
(d) Do a check and repair the wiring of the DGI 04 Bus from the ELAC1 (2CE1) COM part and MON part to the FMGC1 (1CA1) (Ref. ASM 27-92/50), (Ref. ASM 22-86/02).
B. If the F/CTL ELAC1 FAULT warning comes into view 1 second after the AP2 engagement:
(1) Replace the FMGC-2 (1CA2) (Ref. AMM TASK 22-83-34-000-001) and (Ref. AMM TASK 22-83-34-400-001).
(2) If the fault continues:
- replace the ELAC-1 (2CE1) (Ref. AMM TASK 27-93-34-000-001) and (Ref. AMM TASK 27-93-34-400-001).
(3) If the fault continues:
(a) Do the trouble shooting procedure (Ref. TASK 31-32-00-810-932) related to the DSI 10 and DSI 17 signals of the ELAC1 (2CE1) (Ref. ASM 27-92/44), (Ref. ASM 22-85/03). If you find a defect:
- repair it
- do the test given in Para. 3.
If you do not find any defect, continue the trouble shooting.
(4) If the fault continues:
(a) Do the trouble shooting procedure (Ref. TASK 31-32-00-810-934) related to the DGI 05 Bus of the ELAC1 (2CE1) (Ref. ASM 27-92/50), (Ref. ASM 22-82/06). If you find a defect:
- repair it
- do the test given in Para. 3.
If you do not find any defect, continue the trouble shooting.
(5) If the fault continues:
(a) Do a check of the wiring of the DSO 08 signal from the ELAC1 (2CE1) COM part and MON part to the FMGC2 (1CA2) (Ref. ASM 27-92/44)
- if there is continuity see Para. (b)
- if there is no continuity repair the above wiring.
(b) Do a check of the wiring of the DSI 10 signal from the ELAC1 (2CE1) COM part and MON part to the FMGC2 (1CA2) (Ref. ASM 27-92/44), (Ref. ASM 22-85/03).
- if there is continuity see Para. (c)
- if there is no continuity repair the above wiring.
(c) Do a check of the wiring of the DSI 17 signal from the ELAC1 (2CE1) COM part and MON part to the FMGC2 (1CA2) (Ref. ASM 27-92/44), (Ref. ASM 22-85/03).
- if there is continuity see Para. (d)
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 051-099, 101-105, 151-199, ∞∞27-93-00∞∞∞∞∞∞∞∞∞∞Page B267
201-214, Aug 01/05 CES
- if there is no continuity repair the above wiring.
(d) Do a check and repair the wiring of the DGI 05 Bus from the ELAC1 (2CE1) COM part and MON part to the FMGC2 (1CA2) (Ref. ASM 27-92/50), (Ref. ASM 22-86/02).
C. If the F/CTL ELAC1 FAULT warning comes into view 5 seconds after the AP engagement:
(1) On the CAPT side stick, push and hold the takeover and priority pushbutton switch:
(a) On the panel 131VU, on the SIDE STICK PRIORITY/CAPT annunciator light, if the green CAPT legend comes on:
- replace the SSTU-ROLL CTL, F/O (4CE2) (Ref. AMM TASK 27-92-41-000-002) and (Ref. AMM TASK 27-92-41-400-002).
(b) On the panel 131VU, on the SIDE STICK PRIORITY/CAPT annunciator light, if the green CAPT legend does not come on:
1_ If the fault continues:
- replace the SSTU-PITCH CTL, F/O (4CE4) (Ref. AMM TASK 27-92-
41-000-002) and (Ref. AMM TASK 27-92-41-400-002).
- replace the SSTU-ROLL CTL, CAPT (4CE1) (Ref. AMM TASK 27-92-41-000-002) and (Ref. AMM TASK 27-92-41-400-002). 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 飛行操縱 3(80)
