suddenly.
 5) Release the COMM TEST switch.

 (c)  
Speak with a radio operator with the VHF-1 system. 1) Make sure the quality of the transmitted and received voice is satisfactory.

 2)  Make sure the sound of the received voice changes smoothly when you turn the sound control on the audio selector panel.
 3)  Make sure you hear the sidetone when you transmit.
 (d)  Do these steps on the VHF-1 control panel: 1) Set the TFR switch to the right position.
 a)  Make sure the light above the right frequency display is on.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 23-21-00
 ALL  ú ú 11 Page 502 ú Nov 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 b)  Make sure the light above the left frequency display is off.
 (e)  Speak with a radio operator with the VHF-1 system.
 1)  Make sure the quality of the transmitted and received voice is satisfactory.
 S 715-005
 (2)  Do a test of the No. 2 VHF system operation:
 (a)  
Push the VHF-2 switch on the audio selector panel for the first officer. 1) Make sure the VHF-2 indicator light comes on.

 (b)  
Do these steps on the VHF-2 control panel: 1) Set the left frequency display to an approved test frequency.

 2)  Set the right frequency display to a different approved test frequency. a) Make sure the light above the left frequency display is
 on. b) Make sure the light above the right frequency display is off. 3) Push and hold the COMM TEST switch. a) Make sure you can hear a sudden increase in receiver noise. 4) Release the COMM TEST switch.
 (c)  Speak with a radio operator with the VHF-2 system. 1) Make sure the quality of the transmitted and received voice is satisfactory.
 2)  Make sure the sound of the received voice changes smoothly when you turn the sound control on the audio selector panel.
 3)  Make sure that you hear the sidetone when you transmit.
 (d)  Do these steps on the VHF-2 control panel: 1) Set the TFR (transfer) switch to the right position.
 a)  Make sure the light above the right frequency display is on.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 23-21-00
 ALL  ú ú 12 Page 503 ú Mar 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 b)  Make sure the light above the left frequency display is off.
 (e)  Speak with a radio operator with the VHF-2 system.
 1)  Make sure the quality of the transmitted and received voice is satisfactory.
 F.  Put the Airplane Back to the Initial Condition
 S 865-026
 (1)  Remove electrical power if it is no longer necessary
 (AMM 24-22-00/201).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 23-21-00
 ALL  ú ú 10 Page 504 ú Mar 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 VHF COMMUNICATION ANTENNA - REMOVAL/INSTALLATION
________________________________________________
 1.  General_______
 A.  There are two tasks in this procedure. The first task is the removal of the VHF communication antenna. The second task is the installation of the VHF communication antenna.
 TASK 23-21-11-004-018
 2.  VHF Communication Antenna Removal_________________________________
 A.  Standard Tools and Equipment
 (1)  Sealant removal tool - hardwood or plastic
 B.  Consumable Materials
 (1)  B00083 Aliphatic Naphtha solvent - TT-N-95, or equivalent (AMM 20-30-31/201)
 C.  References
 (1)  
AMM 20-10-34/701, Metal Surfaces - Cleaning

 (2)  
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 通訊 COMMUNICATIONS(27)