曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 NOTE:____ Make sure the lamps, spacers, or readouts do not fall into the ISDU.
 S 963-046
 (4)  Replace the decimal/degree/minute lamp: (a) Hold the lamp at the base with the removal tool and pull straight out to remove it.
 NOTE:____ If you use tweezers, be careful because the lamps will break easily if you use too much pressure.
 (b) (c) (d) (e)  Remove and keep the spacer from the lamp.Make sure the wires on the new lamp are straight.Install the spacer.Carefully install the lamp.
 S 963-045
 (5)  Replace the numeric/alphanumeric readout lamp: (a) Hold the perimeter of the readout lamp with the removal tool and pull straight out to remove it. (b) Push the new readout lamp into its position. 1) Make sure the dimple indicator on the lamp is in the top left corner.
 S 423-044
 (6)  Install the transparent window filter assembly: (a) Tighten the two captive screws that hold the window assembly to the ISDU.
 S 863-043
 (7)  Remove the DO-NOT-CLOSE tags and close these circuit breakers: (a) P6-3 Circuit Breaker Panel 1) SECONDARY 2) IRS NO. 2 AC 3) IRS NO. 2 DC (b) P18-2 Circuit Breaker Panel 1) IRS NO. 1 AC 2) IRS NO. 1 DC

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 34-28-11

 ALL  ú ú 01 Page 303 ú Nov 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 TASK 34-28-11-713-060
 3.  Numeric/Alphanumeric Readout or Decimal/Degree/Minute Lamp Test from the ISDU_____________________________________________________________________________ Control Panel_____________
 A.  References
 (1)  AMM 24-22-00/201, Manual Control
 B.  Access
 (1)  Location Zones
 101 Control Cabin, Left

 C.  Procedure
 S 863-062
 (1)  
Supply electrical power (AMM 24-22-00/201).

 S 743-061

 (2)  
Set the display select switch on the inertial system display unit (ISDU) to the TEST position.

 (a) Make sure all the numeric/alphanumeric readouts and decimal/degree/minute lamps operate correctly.

 (3)  
Remove electrical power if it is not necessary (AMM 24-22-00/201).

 S 863-059
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 34-28-11

 ALL  ú ú 01 Page 304 ú Nov 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 IRS MODE SELECT UNIT - REMOVAL/INSTALLATION
___________________________________________
 1.  General_______
 A.  There are two tasks in this subject. The first task is for the removal of the IRS Mode Select Unit (MSU). The second task is for the installation of the IRS MSU.
 B.  The MSU is installed on the pilot's P5 overhead panel.
 C.  Each mode select switch has mechanically locked positions. The mechanically locked positions prevent accidental movement of the switch. In a mechanically locked position, pull the switch away from the unit and set the switch to a different position. This prevents damage to the switch.
 (1)  
In the NAV position, pull the switch away from the unit and set the switch to the ATT position.

 (2)  
In the ATT position, pull the switch away from the unit and set the switch to the NAV position.

 (3)  
In the ALIGN position, pull the switch away from the unit and set the switch to the OFF position.

 TASK 34-28-11-004-001
 2.  IRS Mode Select Unit Removal____________________________
 A.  Access
 (1)  Location Zones
 101 Control Cabin - Left

 B.  Procedure
 S 864-002
 (1)  
Set the two mode select switches on the IRS MSU to the OFF position.

 S 864-004

 (2)  
Open this circuit breaker and attach a DO-NOT-CLOSE tag:

 (a)  P6 Circuit Breaker Panel
 1) SECONDARY

 S 024-005
 (3)  Remove the IRS MSU:
 (a) Release the fasteners on the front of the MSU.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 導航 NAVIGATION 2(84)