20-41-01
 ALL  ú ú 01 Page 205 ú Oct 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

GROUNDING LUG
SEE A
SEE B
HINGE (3 LOCATIONS)
FWD
NOSE GEAR SHOCK STRUT
A
SHOCK STRUT LINKAGE OUTBOARD DOOR ROD
GROUNDING SHOCK POINT STRUT
BODY GEAR SHOCK STRUT DOOR LEFT SIDE (RIGHT SIDE IDENTICAL BUT OPPOSITE)
B
Static Grounding Point Location Figure 201
E00605
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-41-01
 ALL  ú ú 01 Page 206 ú Oct 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 ELECTROSTATIC DISCHARGE SENSITIVE DEVICES - MAINTENANCE PRACTICES
_________________________________________________________________
 1.  General (Fig. 201)_______
 A.  This procedure contains these tasks:
 (1)  
Electrostatic Discharge Sensitive (ESDS) printed circuit board removal.

 (2)  
ESDS printed circuit boards installation.

 (3)  
ESDS metal encased units removal handling.

 (4)  
ESDS metal encased units installation handling.

 (5)  
Wire Integration Unit (WIU) covers removal.

 (6)  
WIU covers installation.

 B.  Many electronic line replaceable units (referred to as LRUs) contain micro-circuits and other sensitive devices which can be damaged internally by electrostatic discharges. These LRUs are identified as Electrostatic Discharge Sensitive (referred to as ESDS). The placards installed on the ESDS LRUs show that you must be careful. The persons who remove, install, and move the ESDS LRUs must know about static electricity and the protection from static discharges that is necessary.
 C.  Electrostatic charges can be caused by these: human bodies, hair, clothing, floors, equipment racks, and equipment units. An electrostatic discharge is electrostatic energy transmitted between materials of different electrical potentials. Electrostatic discharges from nylon clothing or human hair onto polyethylene or steel can cause damage to ESDS components. Damage to the internal components of an ESDS LRU can cause failure with one static discharge. System properties can change with time because of many static discharges.
 D.  The function of these procedures is to show the maintenance persons how to know and touch the ESDS LRUs. These procedures contain the precautions that are necessary to safely touch the units that are identified by the ESDS placard. Three types of decals are in used to identify the units with ESDS sensitive circuits. The military and commercial symbols are used on some units, while the international (JEDEC) symbol is used on most ESDS placard (Fig. 201). The ESDS printed circuit boards that are LRU's are identified with a "STATIC SENSITIVE" placard (Fig. 201).
 TASK 20-41-02-002-053
 2.  ESDS Printed Circuit Boards - Removal_____________________________________
 A.  Equipment
 (1)  
Conductive Bags (Commercially Available)

 (2)  
Conductive Plastic Carrier (Commercially
 Availavle)

 (3)  
Ohmeter

 (4)  
Wrist Straps, Conductive (Commercially
 Availavle)

 (5)  
100% Cotton Twine - Commercially Available

 (6)  
ESDS Labels

 (a)  
JEDEC International Label - multi-source

 (b)  
3M - No. 7102

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-41-02
 ALL  ú ú 01 Page 201 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

STATIC SENSITIVE

TYPICAL BOEING ESDS DECALS

Static Discharge Sensitive Devices Identifiers
Figure 201

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 STANDARD PRACTICES - AIRFRAME(137)