(3)  
Do not cause contamination to adjacent areas when you spray.

 (4)  
Make sure all coatings or finishes are uniform, homogeneous, and free from gelled particles.

 (5)  
Apply primer and stencil paint with spray equipment only.

 (6)  
Make sure all coating or finish materials are correctly mixed and labeled. Discard materials with expired pot life.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-11-10
 ALL  ú ú 01 Page 701 ú Oct 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (7)  
Make sure painted markings are well made and have a solid, homogeneous color.

 B.
References

 (1)  
AMM 20-30-98/201, Cleaning of Specific Polymerics (Series 98)

 (2)  
AMM 51-21-01/701, Paint Stripping

 (3)  
AMM 51-21-02/701, Prepaint Cleaning and Treatment

 (4)  
AMM 51-24-11/701, Decorative Exterior Finishes

 C.
Equipment

 (1)  
Bottles, Polyethylene - size as necessary, with nozzle

 (2)  
Brush, Fiber - soft bristle

 (3)  
Burnishing Tool - plastic or wood

 (4)  
Gloves, Knitted Cotton - lightweight, white

 (5)  
Spray Equipment

 D.
Consumable Materials

 (1)  
Solvents

 (a)  
B00192 or B00193 Solvents - BMS 3-2, Type I or Type II

 (b)  
B01018 Solvent - Series 98

 (c)  
B00083 Solvent - Aliphatic Naphtha, TT-N-95, Type II

 (2)  
G00117 Tape, Masking - Permacel P112

 (3)  
G00033 Wipers, BMS 15-15, Classes A and B

 (4)  
G00251 Abrasive Paper - 280-grit or finer

 (5)  
Finishes

 (a)  
C00319 Primer - BMS 10-79, Type II Primer

 (b)  
C00032 Enamel - BMS 10-60, Type II Enamel

 (c)  
C00035 EC 942 Black (Corogard)

 (6)  
B00151 Solvent - Methyl Isobutyl Ketone (MIBK)

 (7)  
B00079 Solvent - Butyl Acetate

 (8)  
C00259 Enamel - Primer, Green Spray - BMS 10-11, Type I

 (9)  
C00260 Enamel - BMS 10-11, Type II

 E.
Prepare Surface for Stencil Markings

 S 957-014
 (1)  
Mask or put a protective cover on all adjacent surfaces which you will not clean, treat, or coat.

 S 027-002

 (2)  
Remove old markings if necessary:

 (a)  
Strip the markings (AMM 51-21-01/701).

 (b)  
Prepare the surface for the coating (AMM 51-21-02/701).

 (c)  
Apply a layer of material that is equivalent to the initial material (AMM 51-24-11/701).

 S 117-003
 (3)  Clean the surface:
 (a)  Remove loose soil and unwanted grease or oil. Be careful not to get dirt on a larger area than necessary.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-11-10
 ALL  ú ú 01 Page 702 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 WARNING:_______DO NOT SPRAY SOLVENTS OR KEEP THEM IN OPEN CONTAINERS. DO NOT USE FLAMMABLE SOLVENTS IN THE AIRPLANE. SOLVENTS AND CLEANERS CONTAIN TOXIC INGREDIENTS. WEAR PROTECTIVE GLOVES WHEN YOU USE THEM, AND DO NOT GET SOLVENT OR CLEANER ON SKIN OR EYES. MAKE SURE YOU HAVE SUFFICIENT VENTILATION OR USE RESPIRATOR MASKS. INJURY OR DAMAGE CAN OCCUR.
 CAUTION:_______DO NOT USE SOLVENTS OTHER THAN THOSE SPECIFIED. THEY CAN CAUSE DAMAGE TO THE FINISH.
 (b)  Use the applicable solvent:
 WARNING: DO NOT GET SOLVENTS IN YOUR MOUTH, OR YOUR EYES, OR
_______ ON YOUR SKIN. DO NOT BREATHE THE FUMES FROM SOLVENTS . SOLVENTS ARE HAZARDOUS MATERIALS. SOLVENTS MAY BE FLAMMABLE OR HARMFUL TO THE ENVIRONMENT. REFER TO PRODUCT MATERIAL SAFETY DATA SHEETS (MSDS) AND LOCAL REQUIREMENTS FOR PROPER HANDLING PROCEDURES.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 STANDARD PRACTICES - AIRFRAME(61)