REPAIR METHOD - RECONNECTABLE WITH FLARELESS FITTING SLEEVES
TABLE A

Tube Material and Fitting Selection Tables
Figure 802 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-11-05
 ALL  ú ú 02 Page 842 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L07750
A
747-400
MAINTENANCE MANUAL

* SEE TABLE D FOR ASSOCIATED APPROVED FITTINGS.
REPAIR METHOD - RECONNECTABLE WITH FLARELESS FITTING SLEEVES TABLE A
Tube Material and Fitting Selection Tables
Figure 802 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-11-05
 ALL  ú ú 02 Page 843 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L07782
A
747-400
MAINTENANCE MANUAL

REPAIR METHOD - PERMANENT UNIONS, TUBE-TO-TUBE
TABLE B

Tube Material and Fitting Selection Tables
Figure 802 (Sheet 3)

L07911
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-11-05
 ALL  ú ú 02 Page 844 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

FOR TABLES REF LETTER A AND B  TOOL REQUIRED 
A  SWAGER NO. 5570 HARRISON PORTABLE SWAGERS NO. 5175 AND 5720 OR EQUIVALENT STATIONARY 
C B  HAND PRESETTING TOOLS ST879A PRESSURE PRESETTING TOOLS ST878D 
D  HARRISON ROLLER SWAGE TOOL KIT 6633K01 
D (1)  HARRISON ROLLER SWAGING MACHINE 6777 
E  THE TOOL KITS SHOWN. REFER TO FIG. 825 FOR INDIVIDUAL TOOL NUMBERS DLT01MAPM1000 (MANUAL, 10,000 PSI) IS NECESSARY FOR SWAGING WITH NO. D12102C06-26A00 FOR SIZES 08,10, AND 12 (1/2, 5/8 AND 3/4 INCH ONE PUMP UNIT, DLT02MAPP1000 (PNEUMATIC, 10,000 PSI) OR ONE PUMP UNIT, PART NO. D12025-001, IS NECESSARY FOR SWAGING NO. D12102C11-04 FOR SIZE 16 (1 INCH) NO. D12102C03-01A00 FOR SIZES 04 AND 06 (1/4 AND 3/8 INCH) . . CONSULT DEUTSCH FOR TOOL KIT NUMBERS WITH THE TOOL KITS SHOWN. DEUTSCH PERMASWAGE KITS: --------DLT SERIES D12000 SERIES 
F  AMCI: . FRK3P02111-001 
G  NONE NECESSARY - HAND TOOLS ONLY. 
H  AEROQUIP RYNGLOK KIT RTS8-02-006 FOR SIZES 04, 06, 08, 10, 12, 16, 20. 

TOOL REQUIRED FOR REPAIR METHOD
TABLE C

Tube Material and Fitting Selection Tables
Figure 802 (Sheet 4)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-11-05
 ALL  ú ú 02 Page 845 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L07918
A
747-400
MAINTENANCE MANUAL

PART NUMBER  ASSOCIATED APPROVED FITTINGS 
75FITTING NUTS  6UNIONS 
(Roller Swage) BACS13BX (Elastomer Swage) BACS13BX BACS13AP (BITE-Type)  ________For Aluminum tubes less than . . . . tubes used with short flareless fittings, use: For size 20 and 24 Aluminum MS21921-Alum or Steel BACN10CS-Alum or Steel size 20, use: AS4660-Alum BACN10YL-Alum  ________For Aluminum tubes less than . . For size 20 and 24 Aluminum . AS4663-Alum tubes used with short flareless fittings, use: M21924-Alum or Steel MS21902-Alum or Steel size 20, use: 
____For Cres tubes, use: . . . . BACN10YA-Ti BACN10YE-Cres MS21921-Cres, Steel or Ti BACN10CS-Cres, Steel  . . ____For Cres tubes, use: MS21902-Cres, Steel or Ti MS21924-Cres, Steel or Ti 
AS4660-Ti (sizes 20 and 24 only). . . . __For Ti tubes, use: MS21921-Ti, Cres BACN10YE-Cres BACN10YA-Ti  35212 swaged union AS4660-Ti (sizes 20 and 24 only) For Ti tubes, use: MS21924-Cres or Ti MS21902-Cres or Ti . . . . __ 
(Roller Swage) 35211 Sleeve  AS4660-Ti (sizes 20 and 24 only) For Ti tubes, use: . . . . MS21921-Ti, Cres __ BACN10YE-Cres BACN10YA-Ti  AS4660-Ti (sizes 20 and 24 only) 35212 swaged union For Ti tubes, use: MS21924-Cres or Ti MS21902-Cres or Ti __ . . . . 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 STANDARD PRACTICES - AIRFRAME(39)