a) FUEL SYSTEMS FUEL IND ENG 1

 (b)  
For the right engine, open this circuit breaker and attach a DO-NOT-CLOSE tag: 1) P6-2 Load Control Center

 a) FUEL SYSTEMS FUEL IND ENG2
 S 864-039-C00
 (2)  AIRPLANES WITH THE ENGINE INSTRUMENT SYSTEM; Do these steps to remove the electrical power from the fuel flow transmitter:
 (a)  For the applicable engine, remove the electrical power from the fuel flow transmitter.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 73-31-01
 ALL  ú ú C03 Page 401 ú Mar 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
LEFT FAN COWL PANEL
ELECTRICAL
FLANGE K CONNECTOR, FWD
D830
SEE A (W1504)
LOW OIL PRESSURE WARNING
FUEL FLOW SWITCH TRANSMITTER (EXAMPLE)
SEE B
FWD
OIL PRESSURE TRANSMITTER
A
FLANGE H
WASHER
(5 LOCATIONS)

WASHER SCREW FUEL FLOW
(2 LOCATIONS) TRANSMITTER FLANGE J
(EXAMPLE)
SCREW BRACKET WASHER (4 LOCATIONS)
FORWARD
ENGINE

WASHERS
BRACKET (2 LOCATIONS)
AFT ENGINE BRACKET FWD
SCREW
(2 LOCATIONS)
B

Fuel Flow Transmitter Installation
Figure 401

B10866
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 73-31-01
 ALL  ú ú C01 Page 402 ú Nov 15/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 014-040-C00
 (3)  
Open the left fan cowl panel (AMM 71-11-02/201).

 S 034-006-C00

 (4)  
Disconnect electrical connector D830 from the transmitter.

 S 494-005-C00

 (5)  
Install caps on the open connectors.

 S 044-007-C00

 (6)  
Disconnect the bracket on the forward end of the transmitter from the bracket on the engine flange H.

 S 044-008-C00

 (7)  
Disconnect the fuel supply line from the transmitter inlet.

 NOTE: Be prepared to catch the remaining fuel in the manifold.
____
 S 034-009-C00
 (8)  
Remove the bolts that attach the fuel manifold for the transmitter inlet.

 S 024-032-C00

 (9)  
Remove the fuel manifold.

 (a)  Discard the o-ring.
 S 024-010-C00
 (10)
 Remove the bolts that attach the fuel manifold to the transmitter outlet.

 S 024-033-C00

 (11)
 Remove the bolts that attach the transmitter to the bracket.

 (a)  
Move the transmitter up and forward and away from the engine
 push-pull cables.

 (b)  
Remove the transmitter.

 NOTE: Discard the O-ring on the outlet manifold.
____
 S 494-012-C00
 (12) Install caps on the open manifold ends.
 S 494-013-C00
 CAUTION:_______MAKE SURE THE ENDPLATE INSTALLATION IS LEAK TIGHT. FLUID SUPPLIES INTERNAL DAMPING TO PREVENT DAMAGE TO THE TRANSMITTER.
 (13) Install one shipping endplate (leak tight) on the outlet end of the transmitter.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 73-31-01
 ALL  ú ú C04 Page 403 ú Jul 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 624-034-C00
 (14) Fill the inlet end of the transmitter to approximately 3/4-inch below the inlet flange (this permits thermal expansion) with kerosene or petroleum solvent.
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 發(fā)動機燃油和控制(150)