EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-41-25
 ALL  ú ú 05 Page 402 ú Oct 10/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 S 494-005
 (4)  
Do this task: "Installation of the Door Locks on the Body Landing Gear" (AMM 32-00-30/201).

 S 844-006

 (5)  
Remove the pressure from hydraulic systems No. 1 and 2 (AMM 29-11-00/201).

 E.
Remove the Return Valve

 S 024-007
 (1)  
Do these steps to remove the return valve:

 (a)  
Disconnect the three hydraulic lines from the return valve.

 (b)  
Put caps or plugs on the ends of the open hydraulic lines.

 (c)  
Remove the three sets of bolts and washers that attach the return valve to the bracket.

 (d)  
Remove the return valve from the airplane.

 S 034-008
 (2)  
Remove the adapters from the return valve.

 S 034-009

 (3)  
Remove the O-rings and backup rings from the adapters and discard the O-rings.

 S 534-010

 (4)  
Put plugs in the open ports of the return valve.

 TASK 32-41-25-404-011
 3. Alternate Brake Return Valve - Installation (Fig. 401)
___________________________________________
 A. General
 (1)  
In subsequent steps, the alternate brake return valve is referred to as the return valve.

 B.
Consumable Materials

 (1)  
D00288 Lubricant - MCS 352

 NOTE: Use BMS 3-11 or MCS 352 to lubricate the O-rings and fittings
____
 on the valve assembly.

 (2)  D00196 Hydraulic Fluid - BMS 3-11
 NOTE: Use BMS 3-11 or MCS 352 to lubricate the O-rings and fittings
____
 on the valve assembly.

 C. References
 (1)  AMM 09-11-00/201, Towing
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-41-25
 ALL  ú ú 05 Page 403 ú Oct 10/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (2)  
AMM 24-22-00/201, Manual Control

 (3)  
AMM 29-11-00/201, Main Hydraulic Supply System

 (4)  
AMM 31-61-00/001, Integrated Display System

 (5)  
AMM 32-00-30/201, Landing Gear Door Locks

 D.
Access

 (1)  
Location Zones
 138 Body Landing Gear Well - Right
 221 Control Cabin, LH
 222 Control Cabin, RH

 E.
Install the Return Valve

 S 544-012
 (1)
If necessary, remove the plugs in the ports of the return valve.

 S 434-013

 (2)  
Lubricate the O-rings and the backup rings of the three adapters and install them on the adapters.

 S 434-014

 (3)  
Install the three adapters in the ports of the return valve.

 S 424-015

 (4)  
Do these steps to install the return valve:

 (a)  
Position the return valve in its installed position on the airplane.

 (b)  
Install the three sets of bolts and washers that attach the return valve to the bracket.

 (c)  
Remove the caps or plugs that are on the ends of the open hydraulic lines.

 (d)  
Connect the three hydraulic lines to the return valve.

 S 714-016
 (5)  
Do these steps to do an operational test of the return valve:

 (a)  
Make sure the landing gear ground locks are installed (AMM 09-11-00/201).

 (b)  
Make sure the wheel chocks are installed.

 (c)  
If necessary, release the parking brake.

 (d)  
Supply electrical power (AMM 24-22-00/201).

 (e)  
Make sure the power is removed from hydraulic systems No. 1 and 4 (AMM 29-11-00/201).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 6(117)