(3)  
Make sure that the captains's and first officer's F/D switches on the mode control panel are set to the OFF position.

 S 822-085

 (4)  
Do these steps to do the regular alignment from the left CDU.

 NOTE: You can align the IRS from the left CDU or the right CDU.
____ You do not have to align the IRS from both the left CDU and the right CDU. You only have to align the IRS from a single source.
 (a)  
Set the NAV switch on the captain's source select module (P1-1 Panel) to the FMC-L position.

 (b)  
Set the FMC switch on the P2-4 panel to the L position.

 CAUTION: THE SWITCHES ON THE MSU MUST FIRST BE PULLED AND THEN
_______ TURNED TO LEAVE THE NAV POSITION. IN THE NAV POSITION, IF YOU TRY TO TURN THESE SWITCHES BEFORE YOU PULL THEM, YOU CAN DAMAGE THE MSU.
 (c)  Set the switches on the IRS mode select unit (MSU) to the NAV position from the OFF position.
 NOTE: You can find the MSU on the P5 overhead panel.
____
 A regular alignment takes 10 minutes.
 1)  Make sure that the IRS ALIGN MODE L, C, and R memo messages come into view on the upper EICAS display.
 (d)  Push the MENU key on the left CDU.
 1) Make sure that you can see the MENU page.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 34-21-00
 ALL  ú ú 01H Page 202 ú Jun 10/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 (e)  
Push the line select key adjacent to the <FMC prompt.
 1) Make sure that you can see the IDENT page.

 (f)  
Push the line select key adjacent to the POS INIT> prompt. 1) Make sure that you can see the POS INIT page.

 (g)  
Press the CLR key to erase the scratch pad.

 (h)  
Record the latitude and the longitude data into the scratch pad line.

 NOTE: Do not put a space between the latitude and the
____ longitude. (Example: N1234.5W01234.5)
 (i) Push the line select key adjacent to the SET IRS POS> prompt.
 NOTE: The VERIFY IRS POSITION or ENTER IRS POSITION message
____ may appear in the scratch pad. If this happens, check the position on the SET IRS POS line to be sure it is correct. If correct, reenter the same position.
 (j)  Press the NEXT PAGE key to show the POS REF page. 1) Make sure that you can see the position you just entered on the IRS L, C and R lines.
 2)  After 10 minutes, make sure that the IRS ALIGN MODE L, C and R messages are removed from the upper EICAS display.
 NOTE: The IRS is now aligned and in the navigation mode.
____
 S 822-086
 (5)  Do these steps to do the regular alignment from the right CDU.
 NOTE: You can align the IRS from the right CDU or the left CDU.
____ You do not have to align the IRS from both the right CDU and the left CDU. You only have to align the IRS from a single source.
 (a)  
Set the NAV switch on the first officer's source select module (P3-1 Panel) to the FMC-R position.

 (b)  
Set the FMC switch on the P2-4 panel to the R position.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 34-21-00
 ALL  ú ú 01H Page 203 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 CAUTION:_______ THE SWITCHES ON THE MSU MUST FIRST BE PULLED AND THEN
 TURNED TO LEAVE THE NAV POSITION.  IN THE NAV POSITION, IF
 YOU TRY TO TURN THESE SWITCHES BEFORE YOU PULL THEM, YOU

 CAN DAMAGE THE MSU.
 (c)  Set the switches on the IRS mode select unit (MSU) to the NAV position from the OFF position.
 NOTE: You can find the MSU on the P5 overhead panel.
____ A regular alignment takes 10 minutes.
 1)  Make sure that the IRS ALIGN MODE L, C, and R memo messages come into view on the upper EICAS display.
 (d)  
Push the MENU key on the right CDU. 1) Make sure that you can see the MENU page.

 (e)  
Push the line select key adjacent to the <FMC prompt. 1) Make sure that you can see the IDENT page.
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機(jī)維護(hù)手冊 導(dǎo)航 NAVIGATION 1(152)