Pitot-Static System Drains Location
Figure 301 (Sheet 4)

F31498
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 34-11-00
 ALL  ú ú 06 Page 306 ú Oct 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 C. References
 (1)  
25-21-01/401, Sidewall Panel

 (2)  
25-21-04/401, Sidewall and Ceiling Insulation

 (3)  
34-11-00/501, Pitot-Static System

 (4)  
34-13-01/401, Standby Airspeed Indicator

 (5)  
34-13-02/401, Standby Altimeter

 D. Access
 (1)  
Location Zone 115 Area Between Nose Gear Well and Fuselage, LH 116 Area Between Nose Gear Well and Fuselage, RH 117 Electrical and Electronics Compartment, LH 118 Electrical and Electronics Compartment, RH 123 Forward Cargo Container Compartment, Aft Half, LH 146 Bulk Cargo Compartment, RH 211 Passenger Cabin - Nose to First Door, LH 212 Passenger Cabin - Nose to First Door, RH 311 Area Aft of Pressure Bulkhead, LH 312 Area Aft of Pressure Bulkhead, RH

 (2)  
Access Panel
 312A Access door

 E. Prepare to Flush the Pitot-Static System
 S 863-006
 (1)  Open these circuit breakers and attach DO-NOT-CLOSE tags:
 (a)  P6 Main Power Distribution Panel
 1) 6D30 PROBE HEAT PITOT L
 2) 6D31 PROBE HEAT PITOT R
 3) 6D32 PROBE HEAT AUX PITOT L
 4) 6D33 PROBE HEAT AUX PITOT R

 S 013-236
 (2)  
On flight deck, remove the standby airspeed indicator (N246) from center instrument panel (P2) (Ref 34-13-01/401).

 S 013-237

 (3)  
Remove the quick disconnects from the standby airspeed indicator pitot and static system hoses:

 (a)  
Remove the quick disconnects from the pitot and static hoses.

 (b)  
Install pressure caps on the pitot and static hoses.

 (c)  
Temporarily attach the hoses to prevent movement.

 S 013-238
 (4)  On the flight deck, remove the standby altimeter (N141) from the center instrument panel (P2) (Ref 34-13-02/401).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 34-11-00
 ALL  ú ú 04 Page 307 ú Feb 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 S 013-239
 (5)  Remove the quick disconnect from the standby altimeter static system hose:
 (a)  
Remove the quick disconnect from the static hose.

 (b)  
Install the pressure cap on the static hose.

 (c)  
Temporarily attach the hose to prevent movement.

 S 013-240
 (6)  In the electrical and electronics compartment, disconnect the left and right air data computers from the pitot-static system:
 (a)  
Disconnect the pitot and static hoses from the left and right air data computers.

 (b)  
Install protective caps on the left and right air data computer ports.

 (c)  
Remove the quick-disconnects from the pitot and static hoses.

 (d)  
Install pressure caps on the pitot and static hoses.

 (e)  
Temporarily attach the hoses to prevent movement.

 S 013-837
 (7)  In the electrical and electronics compartment, disconnect the center air data computer from the pitot-static system:
 (a)  
Disconnect the pitot and static hoses from the center air data computer (B166) on the E1-3 shelf.

 (b)  
Install a protective cap on the center air data computer ports.

 (c)  
Remove the quick-disconnects from the pitot and static hoses.

 (d)  
Install pressure caps on the pitot and static hoses.

 (e)  
Disconnect the center air data computer pitot hose from the output of the pitot source select valve.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 導航 NAVIGATION 1(19)