S 865-176
 (5)  Open the 180M3 IRS ON BAT circuit breaker on the P180 panel.
 (a)  Make sure that the IRS ON BAT annunciator on the P461 panel does not come on.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 34-21-00
 ALL  ú ú 27A Page 520 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (b)  Make sure that the ground crew call horn in the nose gear wheel well does not operate.
 (6)  S 865-178Close the 180M3 IRS ON BAT circuit breaker on the P180 panel.
 (7)  S 865-177Close the 6D7 IRS AC LEFT circuit breaker on the P6 panel.
 (8)  S 865-179Open the 6D8 IRS AC CENTER circuit breaker on the P6 panel. (a) After 10 seconds, make sure that the IRS ON BAT annunciator on the P461 panel comes on. (b) Make sure that the ground crew call horn on the nose gear wheel well operates.
 (9)  S 865-200Close the 6D8 IRS AC CENTER circuit breaker on the P6 panel. (a) Make sure that the IRS ON BAT annunciator on the P461 panel does not come on. (b) Make sure that the ground crew call horn in the nose gear wheel well does not operate.
 S 865-180

 (10) Open the 6D9 IRS AC RIGHT circuit breaker on the P6 panel.
 (a)  
After 10 seconds, make sure that the IRS ON BAT annunciator on the P461 panel comes on.

 (b)  
Make sure that the ground crew call horn in the nose gear wheel well operates.

 S 865-181
 (11) Close the 6D9 IRS AC RIGHT circuit breaker on the P6 panel.
 (a)  
Make sure that the IRS ON BAT annunciator on the P461 panel does not come on.

 (b)  
Make sure that the ground crew call horn in the nose gear wheel well does not operate.

 S 865-182
 (12) Set the master dim and test switch on the P5 panel to the BRT position.
 (a)  Make sure that the IRS ON BAT annunciator on the P461 overhead panel does not come on.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 34-21-00
 ALL  ú ú 07A Page 521 ú Oct 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 865-183
 (13) Set the IND LTS switch on the P5 overhead panel to the DIM position.
 (a)  Make sure that the IRS ON BAT annunciator on the P461 overhead panel does not come on.
 S 865-184
 (14) Set the IND LTS switch on the P5 overhead panel to the TEST
 position.

 (a)  Make sure that the IRS ON BAT annunciator on the P461 overhead panel comes on.
 S 865-185
 (15) Release the IND LTS switch.
 (a)  Make sure that the IRS ON BAT annunciator on the P461 overhead panel goes out.
 L. Center IRU Standby Power Disconnect Test
 S 865-186
 (1) Open the 6E32 C IRS DISCONNECT circuit breaker on the P6 panel.
 (a)  After 4.5 to 5.5 minutes, make sure that >IRS DC CENTER comes into view on the main EICAS display.
 S 865-187
 (2) Close the 6E32 C IRS DISCONNECT circuit breaker on the P6 panel.
 (a)  Make sure that the >IRS DC CENTER advisory message goes out.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 34-21-00
 ALL  ú ú 04A Page 522 ú Jun 10/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 INERTIAL REFERENCE UNIT - REMOVAL/INSTALLATION
______________________________________________
 1.  General_______
 A.  This procedure contains two tasks. The first task is for the removal of an inertial reference unit (IRU). The second task is for the installation of an IRU.
 B.  The left, center, and right IRUs are installed on shelf number 6 in the electronic equipment rack E1.
 TASK 34-21-01-004-001
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 導航 NAVIGATION 1(163)