79-21-04
ALL ú ú N01 Page 410 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
CASE OD
8. NUT
B-B FROM SHT 3
Lubrication and Scavenge Oil Pump Figure 402 (Sheet 6)
G53451
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
79-21-04
ALL ú ú N01 Page 411 ú Jun 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
HOLES TO SECURE DAMPENER TO THE OIL PUMP MOUNTED ONINSTALL PACKING, THIS SURFACE THIS SURFACEIN THE PACKING GROVE
FROM SHT 4
L-B2507 (0000)
Lubrication and Scavenge Oil Pump
Figure 402 (Sheet 7)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
79-21-04
ALL ú ú N01 Page 412 ú Jun 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
G53452
S 024-009-N00
(14) Remove the lubrication and scavenge oil pump (7) from the main gearbox as follows:
(a)
Remove the four bolts and washers that attach the oil pump to the main gearbox.
(b)
Two of the four oil pump flange bolt holes (where you just removed the bolts) have threads. Find the two threaded holes and install two PWA 86630 or PWA 88774 jackscrew pullers.
NOTE: If you can not find the two threaded bolt holes on the
____ oil pump flange, you can not use the two PWA 86630 or PWA 88774 jackscrew pullers to remove the oil pump. To remove oil pumps without threaded bolt holes, carefully pull on the pump to remove it from the gearbox.
To get the two threaded bolt holes in the oil pump flange, see Sundstrand Service Bulletin 5008437-79-4.
(c)
Turn the two PWA 86630 or PWA 88774 jackscrew pullers with your hand until they touch the gearbox.
(d)
Turn the two PWA 86630 or PWA 88774 jackscrew pullers equally with a wrench until the oil pump is disengaged from the gearbox.
(e)
Carefully remove the oil pump from the main gearbox.
S 034-065-N00
(15)
Remove the two PWA 86630 or PWA 88774 jackscrew pullers from the threaded holes of the oil pump.
S 034-066-N00
(16)
Remove the two large packings (20) from the front of the oil pump.
S 034-011-N00
(17)
Remove the two transfer tubes (17, 18).
(a) Discard the packings (16, 19).
S 034-012-N00
(18)
Discard the packings (5, 6, 8, 9, and 15) from the main oil filter supply and the four scavenge tubes which are disconnected.
S 034-013-N00
(19)
Install the protection caps on the openings of the main gearbox, lubrication and scavenge oil pump, and scavenge tubes.
TASK 79-21-04-404-014-N00
3. Install the Lubrication and Scavenge Oil Pump_____________________________________________
A. Consumable Materials
(1)
D00390 Oil - Engine
(2)
G00964 Compound . Antigalling, Fel.Pro C.200
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
79-21-04
ALL ú ú N02 Page 413 ú Jun 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
B. Parts
~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 滑油 OIL(44)
