79-21-04
ALL ú ú N02 Page 602 ú Jun 10/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
(b) If you find oil leakage around the lubrication and scavenge oil pump and main gearbox interface, remove the lubrication and scavenge oil pump (Ref 79-21-04/401) and visually examine the mounting surfaces for cracks. 1) If you find cracks in the lubrication and scavenge oil
pump, replace the lubrication and scavenge oil pump (Ref 79-21-04/401). 2) If you find cracks in the main gearbox, replace the engine (Ref 71-00-02/401).
3) If there are no cracks in the lubrication and scavenge oil pump or the main gearbox, install the lubrication and scavenge oil pump with the new packings (Ref 79-21-04/401).
(c) If you find oil leakage around the mounting flange of the oil supply tubes or scavenge tubes, do the steps that follow: 1) Disconnect the applicable scavenge tube. 2) Visually examine the mounting surfaces of the scavenge tube
and lubrication and scavenge oil pump for cracks. 3) If you find cracks in the scavenge tube, replace the scavenge tube.
4) If you find cracks in the lubrication and scavenge oil pump, replace the lubrication and scavenge oil pump (Ref 79-21-04/401).
5) If there are no cracks in the lubrication and scavenge oil pump or the scavenge tube, connect the scavenge tube to the lubrication and scavenge oil pump with the new packing.
(d) If you find oil leakage from the housing of the lubrication and scavenge oil pump, do the steps that follow: 1) Visually examine the hole or crack to make sure it is the
source of the oil leak. 2) If the hole or crack is the source of the oil leak, replace the lubrication and scavenge oil pump (Ref 79-21-04/401).
S 226-004-N00
(3) Examine the lubrication and scavenge oil pump for signs of corrosion.
(a) The areas with corrosion that have a depth less than 0.050 inch
(0.127 mm) are permitted.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
79-21-04
ALL ú ú N01 Page 603 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
(b) An area that is not more than the conditions that follow is permitted: 1) The depth of an area with corrosion is the same as but not
more than 0.050 inch (0.127 mm). 2) The area is less than 1.00 square inch (645 square mm). 3) The area is a minimum distance of 2.00 inches (50.80 mm)
from a different area with corrosion.
(c) If the corrosion is more than the limits, replace the lubrication and scavenge oil pump (Ref 79-21-04/401).
S 416-005-N00
(4) Close the thrust reverser halves (Ref 78-31-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
79-21-04
ALL ú ú N01 Page 604 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
MAIN OIL FILTER ELEMENT - REMOVAL/INSTALLATION
______________________________________________
1. General
_______
A. This procedure contains the tasks to remove and install the main oil filter element.
B. The main oil filter element is in the main oil filter housing. The oil filter housing is on the forward face of the main gearbox at the 8 o'clock position. During this procedure the main oil filter element will be referred to as the oil filter element.
C. You must open the left thrust reverser half to get access to the oil filter element.
TASK 79-21-05-004-001-N00
2. Main Oil Filter Element Removal (Fig. 401)
_______________________________
A. Standard Tools and Equipment
(1)
Container - 5 U.S. gallon (19 liter) capacity, satisfactory for oil
B.
References
(1)
AMM 71-11-04/201, Fan Cowl Panels
(2)
AMM 71-11-06/201, Core Cowl Panels
(3)
AMM 78-31-00/201, Thrust Reverser System
(4)
IPC 79-21-06 Fig. 1
C.
Access
(1)
Location Zone 412 Engine 1 - Main Gearbox Fwd Face 8 o'clock 422 Engine 2 - Main Gearbox Fwd Face 8 o'clock 432 Engine 3 - Main Gearbox Fwd Face 8 o'clock 442 Engine 4 - Main Gearbox Fwd Face 8 o'clock
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 滑油 OIL(49)
