-
You can use a BACG20H nylon grommet, which is a divided grommet.
TASK 20-10-06-964-001
2. Replacement of the Grommets___________________________
A. Equipment
(1)
Sharp Knife, Razor Blade, or Equivalent
Equipment
(2)
Grommet Installation Set - A20006-32
B. Consumable Materials
(1)
A00273 Adhesive, BMS 5-126 Type 2 Class 1 or
Type 3 Class 1
(2)
A00119 Adhesive, BMS 5-55
(3)
B00148 Solvent - Cleaning of Phenolics or Nylon (Series 98-1) (AMM 20-30-98 or SOPM 20-30-98).
C. Remove the Grommet
S 024-002
(1) Cut the grommet to remove the grommet from the bulkhead.
D. Install the Grommet with the Control Cable Removed (Fig. 401).
S 114-003
WARNING:_______DO NOT GET SOLVENTS IN YOUR MOUTH OR EYES, OR ON YOUR SKIN. DO NOT BREATHE THE FUMES FROM SOLVENTS. SOLVENTS ARE HAZARDOUS MATERIALS. REFER TO PRODUCT MATERIAL SAFETY DATA SHEETS (MSDS) AND LOCAL REQUIREMENTS FOR PROPER HANDLING PROCEDURES.
(1)
Clean the bulkhead area that will touch the grommet with solvent, Series 98-1 (AMM 20-30-98 or SOPM 20-30-98) .
S 354-004
(2)
Apply BMS 5-126 adhesive on the NAS1368 grommet area that will touch the bulkhead.
(3)
Install the grommet in the bulkhead hole.
S 424-005
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
20-10-06
ALL ú ú 01 Page 401 ú May 28/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
PRIOR TO INSTALLATION
STRUCTURE (REF) (REF)
NAS1368 GROMMET
GROMMET DURING INSTALLATION
DIE
CONTACT AREA
GROMMET INSTALLED
FLIP-TYPE CABLE GROMMET (NAS1368)
Control Cable Grommets Installation Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
20-10-06
ALL ú ú 01 Page 402 ú May 28/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
S 424-006
(4)
Put the Grommet Installation Set tool around the grommet and tighten the NAS1801 screw.
S 024-012
(5)
Remove the Grommet Installation Set tool.
NOTE: The grommet can be loose in the bulkhead hole, but you have
____ to cut the grommet to remove the grommet from the hole.
E. Install the Grommet with the Control Cable Installed (Fig. 401).
S 114-014
WARNING:_______DO NOT GET SOLVENTS IN YOUR MOUTH OR EYES, OR ON YOUR SKIN. DO NOT BREATHE THE FUMES FROM SOLVENTS. SOLVENTS ARE HAZARDOUS MATERIALS. SOLVENTS MAY BE FLAMMABLE OR HARMFUL TO THE ENVIRONMENT. REFER TO PRODUCT MATERIAL SAFETY DATA SHEETS (MSDS) AND LOCAL REQUIREMENTS FOR PROPER HANDLING PROCEDURES.
(1)
Clean the bulkhead area that will touch the grommet with solvent, Series 98-1 (AMM 20-30-98 or SOPM 20-30-98).
S 434-008
(2)
Use these steps to install the NAS1368 grommet:
(a)
Put the Grommet Installation set tool around the grommet and tighten the NAS1801 screw.
(b)
Remove the Grommet Installation Set tool.
(c)
Cut one side of the NAS1368 grommet.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 STANDARD PRACTICES - AIRFRAME(10)
