20-10-09
ALL ú ú 01 Page 871 ú May 28/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L21689
A
757 MAINTENANCE MANUAL
ST878D TOOL ASSEMBLY
ST878D TOOL ASSEMBLY
Preset Pressures (PSI) for the Cherry G-85 Lockbolt Gun with ST878D Presetting Tool Assembly (BACS13AP Sleeves) Figure 818 (Sheet 1)
L21690
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
20-10-09
ALL ú ú 01 Page 872 ú May 28/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
RECOMMENDED AIR PRESSURE (PSI) TUBE WALL
ALUMINUM STEELTOOL NO.
SIZE THICKNESS 6061-T6 AISI 304-1/8 HARD
3/16 0.020-0.035 ST878D-3-020 ST878D-3-035 22.5 30.0
1/4 0.020-0.035 ST878D-4-035 ST878D-4-020 27.5 40.0
5/16 0.020-0.035 ST878D-5-035 ST878D-5-020 30.0 40.0
3/8 0.020-0.035 ST878D-6-035 ST878D-6-020 30.0 52.5
1/2 0.028-0.035 ST878D-8-035 ST878D-8-028 42.5 75.0
5/8 0.028-0.083 ST878D-10-083 ST878D-10-028 50.0 80.0
3/4 0.020-0.049 ST878D-12-049 ST878D-12-020 52.5 85.0
NOTE: ALL DIMENSIONS ARE IN INCHES.
Preset Pressures (PSI) for the Cherry G-85 Lockbolt Gun
with ST878D Presetting Tool Assembly (BACS13AP Sleeves)
Figure 818 (Sheet 2)
L21692
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
20-10-09
ALL ú
ú 01 Page 873
ú May 28/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
AFTER PRESET BY HAND
Preset by Hand with Preset Tool ST879A
Figure 819
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
20-10-09
ALL ú ú 01 Page 874 ú May 28/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L21693
A 757 MAINTENANCE MANUAL
SLEEVE BOW
TUBE END DEFORMATION
MAKE SURE THE ID DOES NOT DECREASE MORE THAN 0.005 INCH AFTER PRESET OR 0.015 INCH AFTER YOU TIGHTEN MANY TIMES.
Properties of Preset BACS13AP Flareless Sleeve/Tube End
Figure 820
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
20-10-09
ALL ú ú 01 Page 875 ú May 28/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L21695
A
757
MAINTENANCE MANUAL
NOTE: ALL DIMENSIONS ARE IN INCHES.
HAND PRESETTING FLARELESS FITTINGS - NO MANDREL
(STEEL TUBING)
TABLE A
ST879A). WHEN IN DOUBT, MAKE A TEST PRESET TO MAKE SURE THE RING CUT MINIMUM DEPTH IS 0.002 INCH.
MEASURE DISPLACEMENT FROM THE POINT WHERE THE FITTING, SLEEVE, AND NUT ARE FIRMLY HAND-TIGHTENED, AND A WRENCH IS NECESSARY TO FURTHER TIGHTEN.
APPLY TORQUE, LOOSEN, AND APPLY INDICATED TORQUE THREE TIMES.
Displacement Turns and Torque Values for Hand Preset of Flareless Sleeves
Figure 821
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
20-10-09
ALL ú ú 01 Page 876 ú May 28/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L21696
A
757
MAINTENANCE MANUAL
H-Coupling Installation
Figure 822
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：757 AMM 飛機維護手冊 STANDARD PRACTICES - AIRFRAME(47)
