曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

3) Open main switch-breaker.
ABAA
Validity : S / N 1 - 9999 12-21-04Page 201
(CA) JUN 02
 
4) Install the warning sign prohibiting main switch-breaker operation.
WARNING
DO NOT OPERATE
MAINTENANCE WORK IN PROGRESS
5) Using a brush soaked with cleaning agent (TB 11-003), clean :
- aileron and flap control rod ends and hinges,
- control lever ends.
6) Remove excess cleaning agent with a clean lintfree cloth.
7) Using a brush and grease (TB 04-004A), lubricate :
- aileron and flap control rod ends and hinges,
- control lever ends.
8) Remove excess grease with a clean lintfree cloth. AVIAC flap actuator
9) Using a brush and grease (TB 04-004A), lubricate the flap actuator.
LPMI flap actuator
9) Using a brush and grease (TB 06-900), lubricate the flap actuator.
All
10) Make sure all the tools and materials are removed and the work area is clean and free from debris.
11) Install cowling under hull 218 and inspection doors 512,612,516 and 616 - refer to 06-30-00.
12) Remove the warning sign prohibiting main switch-breaker operation.
13) Close main switch-breaker.
CAUTION : MAKE SURE THE FLAP AREA IS CLEAR.
14) Retract flaps.
ABAA
Validity : S / N 1 - 9999
12-21-04Page 202
(CA) JUN 02
 
 
 
• POINT DE LUBRIFICATION LUBRICATION POINT
Areas 500 / 600 lubrication - Wing / fuselage attachments
Figure 201
ABAA
Validity : S / N 1 - 9999 12-21-04Page 203
(CA) JUN 02
 
 
 
• POINT DE LUBRIFICATION LUBRICATION POINT
Areas 500 / 600 lubrication - Flaps and ailerons
Figure 202
ABM
Validity : S / N 1 - 9999 12-21-04Page 204
(CA) JUN 02
 
Areas 500 / 600 lubrication - Aileron and flap controls
Figure 203 - AVIAC flap actuator
ABAA
Validity : S / N 1 - 9999 12-21-04Page 205
(CA) JUN 02
 
Areas 500 / 600 lubrication - Aileron and flap controls
Figure 203A - LPMI flap actuator
ABAA
Validity : S / N 1 - 9999 12-21-04Page 206
(CA) JUN 02
 
AREA 700 LUBRICATION
MAINTENANCE PRACTICES
1. AREA 700 LUBRICATION
A. Tools and consumable materials
- Cleaning agent (TB 11-002)
- Oil (TB 03-900)
- Grease (TB 04-004A)
- Clean lintfree cloths
- Drip pan
- Brush
- Compressed air source with pressure gage 0 - 43.5 psi (0 - 3 bars)
- Compressed air gun with incorporated reservoir
- Grease gun
B. Lubrication of nose landing gear (Figures 201, 202 and 203)
1) Remove the engine cowlings - refer to 71-10-01.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：TB20 MAINTENANCE MANUAL 12 SERVICING TB20飛機維護手冊 12 保養(64)