曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

92661 V98769 Senior Flexonics Inc. Stainless Steel Products Div. 2980 N. San Fernando Blvd. Burbank, CA
91504-2522
V99167 Hamilton Sundstrand Corp. 4747 Harrison Ave. P.O. Box 7002 Rockford, IL 61125-7002
V99240 CRISSAIR, Inc. 38905 10th Street East Palmdale, CA 93550-3415
V99742 Permacel Div. of Johnson and Johnson US Highway No. 1 P.O. Box 671 New Brunswick, NJ
08903 V99755 Flexible Metal Hose Mfg Co. 345 Fisher Ave P.O. Box 10729 Cosa Mesa, CA 92627-4302
7. Consumable Materials
Table 7:
Material Source  Usage
Adhesive  BMS 5-25 Bonding washers to structure Grade 1
Anti-Seize Compound  Bostik Never On threads and faying surfaces of parts in hot section. Seez Pure Nickel Special (V5W425) Fel-pro C200 (V73165)
MIL-A-907 On threads of nut and retainer.
AMS 3080 On threads of fittings in pneumatic tubing. (opt)
Edge Sealant  683-3-2 Basic Oil & marker Instl (V98502) X-310A Catalyst
Engine Oil & Petrolatum  None General purpose O-ring Lubricant
INTRODUCTION
Page 9 May 05/2009
 
 

(Continued)

Material  Source  Usage 
Grease  MIL-G-434  On threads of fittings in pneumatic tubing. 
(opt) 
BMS 3-24  On threads of titanium bolts securing PT2/TT2 access panel. 
Hydraulic Tubing Lube  MCS 352  On threads of fittings in hydraulic tubing. 
Lacquer thinner  Methyl Ethyl  General purpose cleaner 
Ketone 
Lockwire  MS20995N32  General purpose applications AVM Instl 
MS20995NC20 
Lubricant  Silicone  IDG Instl 
Grease 
Dow Corning 
#4 (V71984) 
MIL-L-7808  General purpose O-ring Lube 
BMS 3-8  On threads of clamps 
MIL-L-23699  O-rings for starter & valve 
MIL-L-7808 
(opt) 
Safety Cable  AS3510-02( )K  General purpose applications. Refer to usage instructions in 
(V70958)  applicable installation figures. 

NOTE: ( ) refers to length in increments of 3 inches.
Sealant  BMS 5-79 PT2/TT2 Probe Sealant Pro Seal 860 Class B
(V83527) BMS 5-63 Grounding Wire Sealant Solvent Federal Flush IDGS Cooling System Specification P-D-680 Type I
Tape  Scotch 70 Under wire bundle clamps (Fan Case) (V76381) P421, P440 Under wire bundle clamps (Core Case)
(Opt) (V99742) Teflon tape, Acrylic back Scotch 63, or Tubing clamps 65 (V26066) Wet Primer BMS 10-11 Washer & Clamp Instl Type I
8.  Standard Practices
A.  Before starting engine buildup, read the applicable sections of this manual to become familiar with items to be installed and procedures to be followed. Also, review the Standard Overhaul Practices Manual (D6-51702) for additional information on standard practices, specifically the following:
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 動力裝置安裝手冊 Powerplant Buildup Manual(10)