71-00-02
 

ITEM NO.  PART NUMBER  NOMENCLATURE  UC  QTY 
12-2  WIRE HARNESS INSTALLATION -CORE CASE (FIGURE 12-2, SHEET 4) D4798 (#2 IGNITER) AND D4794 (OIL PRESS XDUCER), SPECIAL TORQUING PROCEDURE: 1. TIGHTEN CONNECTOR HAND TIGHT PLUS 1/8 TURN MAXIMUM. 2. MEASURE ELECTRICAL RESISTANCE BETWEEN EQUIPMENT HOUSING ADJACENT TO CONNECTOR AND GROUND LEAD TERMINAL ON STRAIN RELIEF BACKSHELL. 3. RESISTANCE SHALL NOT EXCEED 0.005 OHMS. 

71-00-02
 

Wire Harness Installation -Core Case
Figure 12-2 (Sheet 5)

71-00-02
 

ITEM NO.  PART NUMBER  NOMENCLATURE  UC  QTY 
12-2  WIRE HARNESS INSTALLATION -CORE CASE (FIGURE 12-2, SHEET 5) THIS SHEET NOT USED 

71-00-02
 

Wire Harness Installation -Core Case
Figure 12-2 (Sheet 6)

71-00-02
 

ITEM NO.  PART NUMBER  NOMENCLATURE  UC  QTY 
12-2  WIRE HARNESS INSTALLATION -CORE CASE (FIGURE 12-2, SHEET 6) ATTACH W/B’S W5300 (5) AND W5302 (10) TO BRACKETS WITH ITEMS (15 THRU 55). 
15  TA025041-( )  . CLAMP  2 
TA025041-( )  . CLAMP  2 
BACS12HN3U9  . SCREW  2 
BACN10YR3C  . NUT  2 
NAS1149C0332R  . WASHER  2 
25  TA025041-( )  . CLAMP  2 
TA025041-( )  . CLAMP  2 
BACS12HN3U9  . SCREW  2 
BACN10YR3C  . NUT  2 
NAS1149C0332R  . WASHER  2 
35  TA025041-( )  . CLAMP  2 
TA025041-( )  . CLAMP  2 
BACS12HN3U9  . SCREW  2 
BACN10YR3C  . NUT  2 
NAS1149C0332R  . WASHER  2 
40  TA025041-( )  . CLAMP  1 
TA025041-( )  . CLAMP  1 
BACS12HN3U9  . SCREW  1 
BACN10YR3C  . NUT  1 
NAS1149C0332R  . WASHER  1 
45  TA025041-( )  . CLAMP  2 
TA025041-( )  . CLAMP  2 
BACS12HN3U18  . SCREW  2 
BACN10YR3C  . NUT  2 
NAS1149C0332R  . WASHER  2 
55  TA025041-( )  . CLAMP  1 
TA025041-( )  . CLAMP  1 
NAS43DD3-36  . SPACER  1 
BACS12HN3U18  . SCREW  1 
BACN10YR3C  . NUT  1 
NAS1149C0332R  . WASHER ATTACH AND TIGHTEN D5040 AND D5038 CONNECTORS TO FIRE DETECTORS.  1 

71-00-02
 

Wire Harness Installation -Core Case
Figure 12-2 (Sheet 7)

71-00-02
 

ITEM NO.  PART NUMBER  NOMENCLATURE  UC  QTY 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 動力裝置安裝手冊 Powerplant Buildup Manual(98)