曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

5  69B97200-3  . SHEAR PIN  1 
10  BACN10HR4C  . NUT REMOVE SCREWS (18) AND END CAP (17) FROM FWD SECTION (16). ALIGN FWD SECTION (16) WITH INDEX PIN AND MOUNTING HOLES IN ENG FLANGE -T1-. SECURE WITH BOLTS (20) AND TIGHTEN TO 85-95 LB-IN WITH DRY THREADS OR 65-75 LB-IN WITH LUBRICATED THREADS (ANTI-SEIZE COMPOUND). LUBRICATE THREADS OF SCREWS (18) WITH ANTI-SEIZE COMPOUND. POSITION END CAP (17) ON FWD SECTION (16) AND SECURE WITH SCREWS (18). TIGHTEN SCREWS (18) TO 25-30 LB-IN. MAXIMUM GAP BETWEEN FWD SECTION (16) AND END CAP (17) 0.005 INCHES ALL AROUND AFTER INSTALLATION.  1 
15  314N3200-9  . PLUG ASSY  1 
15  314N3200-7  . PLUG ASSY  OPT  -
16  . . FWD SECTION 
17  . . END CAP 
18  123423-3-2  . . SCREW (V80539)  VEN  20 
20  BACB30PN5-4  . BOLT  10 

71-00-02
 
PW2000 SERIES ENGINES

757
POWERPLANT BUILDUP MANUAL

Primary Exhaust Installation
Figure 13-1 (Sheet 2)

71-00-02
P/P BUILDUP FIGURE 13-1 Page 4 May 05/2009
 

ITEM NO.  PART NUMBER  NOMENCLATURE  UC  QTY 
13-1  PRIMARY EXHAUST INSTALLATION (FIGURE 13-1, SHEET 2) APPLY ANTI-SEIZE COMPOUND TO THREADS OF SHEAR PINS (25). INSTALL SHEAR PIN (25) IN HOLES JUST BELOW THE 3 AND 9 O’CLOCK POSITIONS ON FLANGE -T-USING NUTS (30). 
25  69B97200-3  . SHEAR PIN  2 
30  BACN10HR4C  . NUT ATTACH HOISTING SLING TO NOZZLE ASSY (35). POSITION NOZZLE ASSY (35) OVER PLUG ASSY (15). ALIGN SHEAR PINS (25) AND MOUNTING HOLES ON ENGINE FLANGE -T-. ATTACH NOZZLE ASSY (35) TO FLANGE WITH ITEMS (40 THRU 50). INSTALL WASHER (45) UNDER BOLT (40). TIGHTEN NUTS (50) TO 85-95 LB-IN.  2 
35  314N3310-35  . NOZZLE ASSY  1 
35  314N3310-34  . NOZZLE ASSY  OPT  -
40  BACB30PN4-5  . BOLT  60 
45  NAS1587-4C  . WASHER  60 
50  BACN10HR4C  . NUT  60 

71-00-02
 
PW2000 SERIES ENGINES

757
POWERPLANT BUILDUP MANUAL

FIGURE 14-1
INLET COWL INSTALLATION

REF QEC TASK NO.: 14
REF DWG: 330N3010

71-00-02
P/P BUILDUP FIGURE 14-1 Page 1 May 05/2009
 
PW2000 SERIES ENGINES

757
POWERPLANT BUILDUP MANUAL

Inlet Cowl Installation
Figure 14-1 (Sheet 1)

71-00-02
P/P BUILDUP FIGURE 14-1 Page 2 May 05/2009
 

ITEM NO.  PART NUMBER  NOMENCLATURE  UC  QTY 
14-1  INLET COWL INSTALLATION (FIGURE 14-1, SHEET 1) INSTALL SHEAR PINS (5) IN ENG FLG -A-AND SECURE WITH ITEMS (10, 15). 
5  314T3019-2  . SHEAR PIN  2 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 動力裝置安裝手冊 Powerplant Buildup Manual(102)