71-00-02
 

Integrated Drive Generator Plumbing Installation Figure 6-3 (Sheet 4)
71-00-02
 

ITEM NO.  PART NUMBER  NOMENCLATURE  UC  QTY 
6-3  INTEGRATED DRIVE GENERATOR PLUMBING INSTALLATION (FIGURE 6-3, SHEET 4) FLUSH IDG OIL SYSTEM PER IDG COOLING SYSTEM FLUSHING PROCEDURE. IDG COOLING SYSTEM FLUSHING PROCEDURE THE FOLLOWING PROCEDURE PROVIDES FLUSHING INSTRUCTIONS FOR THE IDG COOLING SYSTEM COMPONENTS. CAUTION: DO NOT FLUSH THE IDG COOLING SYSTEM WITH MORE THAN 250 PSIG MAXIMUM PRESSURE. USING MORE THAN THE MAXIMUM PRESSURE CAN DAMAGE THE SYSTEM. PRIOR TO CONNECTING PW OIL HOSES TO IDG OIL IN AND OIL OUT PORTS, ATTACH A 239 CUBIC FOOT NITROGEN BOTTLE TO THE OIL OUT HOSE. APPLY A PRESSURE OF 250 PSIG (MAXIMUM) TO THE HOSE. FLUSH ONLY IN THE NORMAL FLOW DIRECTION. IF ANY RESIDUAL FLUIDS FROM THE EXTERNAL COOLING SYSTEM COMES OUT OF THE IDG OIL IN LINE, DO THE FLUSHING PROCEDURE AGAIN. IF THE RESULTS ARE SATISFACTORY, PROCEED AS FOLLOWS; CONNECT PW HOSES TO OIL IN AND OIL OUT PORTS OF IDG. 

71-00-02
 
PW2000 SERIES ENGINES

757
POWERPLANT BUILDUP MANUAL

FIGURE 6-4
MAGNETIC PLUG INSTALLATION
REF QEC TASK NO.: 6
REF DWG: 332N3470 NOTE: THIS FIGURE NOT USED
71-00-02
P/P BUILDUP FIGURE 6-4 Page 1 Jan 15/2010
 
PW2000 SERIES ENGINES

757
POWERPLANT BUILDUP MANUAL

THIS FIGURE NOT USED
Figure 6-4 (Sheet 1)

71-00-02
P/P BUILDUP FIGURE 6-4 Page 2 Jan 15/2011
 

ITEM NO.  PART NUMBER  NOMENCLATURE  UC  QTY 
6-4  THIS FIGURE NOT USED (FIGURE 6-4, SHEET 1) THIS SHEET NOT USED 

71-00-02
 
PW2000 SERIES ENGINES

757
POWERPLANT BUILDUP MANUAL

FIGURE 6-5
OIL MARKER INSTALLATION

REF QEC TASK NO.: 6
REF DWG: 310N3072

71-00-02
P/P BUILDUP FIGURE 6-5 Page 1 May 05/2009
 
PW2000 SERIES ENGINES

757
POWERPLANT BUILDUP MANUAL

Oil Marker Installation
Figure 6-5 (Sheet 1)

71-00-02
P/P BUILDUP FIGURE 6-5 Page 2 May 05/2009
 

ITEM NO.  PART NUMBER  NOMENCLATURE  UC  QTY 
6-5  OIL MARKER INSTALLATION (FIGURE 6-5, SHEET 1) INSTALL MARKERS (5) ON OIL TANK, STARTER AND BRACKET SUPPORTING IDG PRESSURE FILL FITTINGS. BRUSH COAT EDGES OF MARKERS WITH EDGE SEALANT (REF 71-00-00, INTRODUCTION). 
5  BAC27DAP31  . MARKER (BP/EXXON TURBO OIL 2380)  3 
5  BAC27TPP0024  . MARKER (ESSO OR EXXON TURBO OIL 2380) (REPLACED BY BAC27DAP31)*[1]  LTD  -
5  BAC27EPP-4  . MARKER (MOBIL JET OIL II)  OPT  -
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 動力裝置安裝手冊 Powerplant Buildup Manual(71)