4. Procedure
_________
Subtask 12-21-12-110-050
A. Cleaning of the Seat Covers and the Curtains R (Ref. Fig. 306/TASK 12-21-12-991-005)
WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
_______ AREA WHEN YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES : -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES. -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE
_______ MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES AND GOGGLES.
CAUTION : USE ONLY THE SPECIFIED MATERIALS AND OBEY THE INSTRUCTIONS FROM
_______ THE MANUFACTURERS. OTHER MATERIALS CAN CAUSE DAMAGE TO THE SURFACE PROTECTION OF THE COMPONENTS AND THE RELATED AREA.
(1) Stain removal.
(a) Soak the area of the stain with CLEANING AGENTS (Material No. 11-018).
1 Dry the wet area with a lint-free cotton cloth MISCELLANEOUS
_
(Material No. 19-003).
(b) Dry clean.
1 Dry clean the area of the stain with a solution of CLEANING
_ AGENTS (Material No. 11-018) and CLEANING AGENTS (Material No. 11-002) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003).
5. Close-up
________ Subtask 12-21-12-862-058
A. De-energize the ground service network (Ref. TASK 24-42-00-862-001).
1EFF : ALL 1 12-21-12Page 333 1 1 Aug 01/05R 1 1 1CES 1
TASK 12-21-12-100-006
Cleaning of the Light Alloy and Steel Components
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific 1 CAP - PROTECTION
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
No specific warm clean water
Material No. 11-016 USA BOEING BAC 5000 BAC 5504 BAC 5750
CLEANING SOLVENT (Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power R 12-21-12-991-006 Fig. 307
3. Job Set-up
__________
Subtask 12-21-12-861-059
A. Energize the ground service network
(Ref. TASK 24-42-00-861-001).
4. Procedure
_________
Subtask 12-21-12-160-074
A. Cleaning of Light Alloy and Stainless Steel Components R (Ref. Fig. 307/TASK 12-21-12-991-006)
(1) Put CAP - PROTECTION on the electrical outlets so that they do not get wet.
(a)
Apply CLEANING AGENTS (Material No. 11-016) to the surface with a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003).
(b)
Clean the surface with a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003) and warm clean water.
(c)
Dry the surface with a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003).
(d)
Remove the protection caps from the electrical outlets.
5. Close-up
________
Subtask 12-21-12-862-059
A. De-energize the ground service network
(Ref. TASK 24-42-00-862-001).
TASK 12-21-12-100-007
Cleaning of the Cargo Compartments
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM SERVICING 1(130)
