(Ref. Fig. 201/TASK 12-00-00-991-001-A) R **ON A/C 151-199, 401-499,
 (Ref. Fig. 201A/TASK 12-00-00-991-001-B)
 **ON A/C 301-399,

 (Ref. Fig. 201B/TASK 12-00-00-991-001-C)
 **ON A/C ALL

 Subtask 12-00-00-081-050-A
 A. Removal of the Wing Safety Rope
 (1)
 Pull the handle of the latching ratchet (4) to release the tension of the SAFETY ROPE - WING (98D57004022000).

 (2)
 Remove and retain the bolts (9) and the washers (10) which attach the bracket (11) on the wing tip joint.

 (3)
 Remove the aircraft screws from the bracket (11).

 (4)
 Install the aircraft screws in the wing tip joint.

 (5)
 Stow the bolts (9) and the washers (10) on the bracket (11).

 (6)
 Remove the anchor shackle (2) from the hoisting lug (1).

 (7)
 Remove the hoisting lug (1) from the fuselage.

 (8)
 Install the hoisting lug (1) on the shackle (2).

 (9)
 Remove the SAFETY ROPE - WING (98D57004022000) from the wing.

 (10) Install the plastic plug, retained at installation, on the fuselage.

 Installation of the Wing Safety rope Figure 201/TASK 12-00-00-991-001-A12 (SHEET 1)
R 1EFF : 001-049, 051-099, 101-149, 201-299, 1 12-00-00Page 204 1 1 May 01/05 1 1 1CES 1

 Installation of the Wing Safety rope Figure 201/TASK 12-00-00-991-001-A22 (SHEET 2)
R 1EFF : 001-049, 051-099, 101-149, 201-299, 1 12-00-00Page 205 1 1 May 01/05 1 1 1CES 1

 Installation of the Wing Safety Rope
 Figure 201A/TASK 12-00-00-991-001-B12 (SHEET 1)

R 1EFF : 151-199, 401-499, 1 12-00-00Page 206 1 1 Aug 01/05 1 1 1CES 1

 Installation of the Wing Safety Rope
 Figure 201A/TASK 12-00-00-991-001-B22 (SHEET 2)

R 1EFF : 151-199, 401-499, 1 12-00-00Page 207 1 1 Aug 01/05 1 1 1CES 1

R Installation of the Wing Safety Rope
R Figure 201B/TASK 12-00-00-991-001-C12 (SHEET 1)

R 1EFF : 301-399, 1 12-00-00Page 208 1 1 May 01/04 1 1 1CES 1

R Installation of the Wing Safety Rope
R Figure 201B/TASK 12-00-00-991-001-C22 (SHEET 2)

R 1EFF : 301-399, 1 12-00-00Page 209 1 1 May 01/04 1 1 1CES 1

 (11)
 Install a new self adhesive patch (1) on the fuselage at the hoisting

 lug location

 (12)
 If necessary, paint the self adhesive patch to the same color as the adjacent area (Ref. TASK 51-75-12-300-003).

 5. Close-up
________ Subtask 12-00-00-942-054
 A. Put the aircraft back to its initial configuration.
 (1)
 Remove the access platform(s).

 (2)
 Remove the warning notice(s).

 (3)
 Make sure that the work area is clean and clear of tool(s) and other items.

 1EFF : ALL 1 12-00-00Page 210 1 1 May 01/04R 1 1 1CES 1

 TASK 12-00-00-481-001
 Installation of the Wing Safety Rope
 WARNING : MAKE SURE THAT THE FLIGHT CONTROL SAFETY-LOCKS AND THE WARNING

_______
 NOTICES ARE IN POSITION.

 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notice
 No specific ajustable access platform 4 m (13 ft. 1 in.)
 98D57004022000 1 SAFETY ROPE - WING

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
27-50-00-866-009 Retraction of the Flaps on the Ground
 27-80-00-866-005 Retracting the Slats on the Ground

 **ON A/C 001-049, 051-099, 101-149, 201-299,
 12-00-00-991-001-A Fig. 201 R **ON A/C 151-199, 401-499,
 12-00-00-991-001-B Fig. 201A -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------

R  **ON A/C 301-399,
R  12-00-00-991-001-C Fig. 201B **ON A/C ALL
 3. Job Set-up
__________
 Subtask 12-00-00-860-050
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM SERVICING 1(18)