Cargo Smoke Detection - Block Diagram
 Figure 047

R 1EFF : 106-149, 301-399, 401-499, 1 23-73-00Page A40 1 1 Config-2 Aug 01/05 1 1 1CES 1

R  **ON A/C 106-149, 301-399, 401-499,
 (14) Air Conditioning
 **ON A/C 301-399,
 (Ref. Fig. 048) 
R  **ON A/C 106-149, 301-399, 401-499,
 (a) General The CIDS has the capability to do a fine adjustment of the temperature in the separate cabin zones. (Ref. 21-63-00)
 (b) Operation
 **ON A/C 106-149,
 (Ref. Fig. 049)
 **ON A/C 301-399,
 (Ref. Fig. 049A) 
R  **ON A/C 401-499, 
R  (Ref. Fig. 049B) 
R  **ON A/C 106-149, 301-399, 401-499,
 On the CABIN TEMPERATURE page of the FAP the actual temperature in the separate cabin zones is indicated in relation to the seatrows. For a fine adjustment push the button next to the related cabin zone. Then the cockpit selected temperature for this cabin area is indicated in a new window, where the new target temperature can be selected. 

R 1EFF : 106-149, 301-399, 401-499, 1 23-73-00Page A41 1 1 Config-2 Aug 01/05 1 1 1CES 1

 Air Conditioning - Block Diagram
 Figure 048

R 1EFF : 301-399, 1 23-73-00Page A42 1 1 Config-2 Aug 01/05 1 1 1CES 1

 FAP - Cabin Temperature Page (only Cabin Temerature related buttons labeled) -
Example
 Figure 049 
R 1EFF :  106-149,  1  23-73-00 Page A43 
1  1  Config-2 Aug 01/05
 1  1
 1CES  1

 FAP - Cabin Temperature Page (only Cabin Temerature related buttons labeled) -
Example
 Figure 049A
 1EFF :  301-399,  1  23-73-00 Page A44 
1  1  Config-2 Aug 01/05
 1R 1 
1CES  1

R FAP - Cabin Temperature Page (only Cabin Temerature related buttons labeled) -
R  Example 
R  Figure 049B 
R 1EFF : 401-499,  1 23-73-00 Page A45 
1  1  Config-2 Aug 01/05
 1  1
 1CES  1

 (c) Signal transmission The actual temperature data are transmitted from the Air Conditioning System Controller (ACSC) to the director. The director sends these signals to the FAP where the temperature is indicated. If a new target temperature is selected the signals are sent from the FAP via the director to the ACSC.
 (15) Emergency Evacuation Signalling (EVAC)
 **ON A/C 301-399,
 (Ref. Fig. 050)

R **ON A/C 106-149, 301-399, 401-499,
 (a) General The Emergency-Evacuation Signalling (EVAC) system controls the evacuation signalling in all cabin areas and the cockpit. It is activated from the cockpit or the Flight Attendant Panel (FAP) during an emergency evacuation.

R **ON A/C 106-149, 401-499,
 (b)
 Cockpit operation Push the EVAC COMMAND button in the cockpit to activate the EVAC function. The indicator light of the EVAC COMMAND button in the cockpit flashes. The indicator light of the EVAC RESET button on the FAP hardkey panel flashes. The EVAC indicator light of the AAP flashes. The EVAC signalling tone sounds through the loudspeakers at all attendant stations. On the AIPs the message EVACUATION ALERT is displayed and the red indicator light flashes.

 (c)
 Cabin operation

 1 EVAC switch in the cockpit in CAPT+PURS position
_ Push the EVAC CMD button on the FAP hardkey panel to activate the EVAC function. The indicator light of the EVAC CMD button on the FAP hardkey panel comes on.
R 1EFF : 106-149, 301-399, 401-499, 1 23-73-00Page A46 1 1 Config-2 Aug 01/05 1 1 1CES 1

 Emergency EVAC Signalling - Block Diagram
 Figure 050

 1EFF : 301-399, 1 23-73-00Page A47 1 1 Config-2 Aug 01/05R 1 1 1CES 1

 The indicator light of the EVAC RESET button on the FAP
 hardkey panel flashes.
 The indicator light of the EVAC button on the AAP flashes.
 The indicator light of the EVAC CMD button in the cockpit
 flashes.
 You hear the EVAC warning tone through the EVAC horn in the
 cockpit.
 You hear the EVAC warning tone through all attendant station
 loudspeakers.
 On all AIPs the message EVACUATION ALERT comes on and the red
 indicator light flashes.
 A discrete output goes to the FWC.

 2 EVAC switch in the cockpit in CAPT position
_ Push the EVAC CMD button on the FAP hardkey panel to activate the EVAC request function. The indicator light of the EVAC CMD button on the FAP hardkey panel comes on. The indicator light of the EVAC CMD button in the cockpit flashes. The EVAC warning tone sounds through the EVAC horn in the cockpit for three seconds. A discrete output goes to the FWC.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊3(106)