(2)
Carefully remove the rivets (11) and (12) with a drill, so that you do not make the holes larger. Remove the static discharger retainer (14), then remove and discard the washers (13).
Subtask 23-61-42-020-054
D. Removal of the Static Discharger Retainers Zone 534 (634) (Wing-Tip) (Ref. Fig. 404/TASK 23-61-42-991-005)
(1) Carefully remove the rivets (1) and (3) with a drill, so that you do not make the holes larger. Remove the static discharger retainer (2), then remove and discard the filling piece (4).
Subtask 23-61-42-020-055
E. Removal of the Static Discharger Retainers Zone 534 (634) (Wing-Tip
Fence)
(Ref. Fig. 405/TASK 23-61-42-991-006)
(1)
Carefully remove the rivets (5) and (6) with a drill, so that you do not make the holes larger. Remove the static discharger retainer (4).
(2)
Carefully remove the rivets (8) and (9) with a drill, so that you do not make the holes larger. Remove the static discharger (7).
(3)
Carefully remove the rivets (11) and (12) with a drill, so that you do not make the holes larger. Remove the static discharger retainer (10).
(4)
Carefully remove the rivets (14),(15) and (16) with a drill, so that you do not make the holes larger. Remove the static discharger retainer (13).
1EFF : ALL 1 23-61-42Page 411 1 1 Feb 01/98 1 1 1CES 1 TASK 23-61-42-400-001
Installation of the Static Discharger Retainer
WARNING : MAKE SURE THAT THE FLIGHT CONTROL SAFETY-LOCKS AND THE WARNING
_______
NOTICES ARE IN POSITION.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
R R Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers
No specific warning notice
No specific access platform 5 m (16 ft. 5 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 09-002 USA MIL-S-8802 TYPE I CLASS B
FUEL TANK SEALANTPOLYSULFID(NO LONGER AVAILABLE
(Ref. 20-31-00)
Material No. 11-026 GB DEF-STAN 68-148/1
SOLVENT GENERAL PURPOSE (Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
1EFF : ALL 1 23-61-42Page 412 1 1 May 01/04 1 1 1CES 1 C. Expendable Parts
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
1 rivets
3 rivets
3 rivets
4 rivets
5 rivets
5 rivets
5 rivets
6 rivets
7 rivets
8 rivet
8 rivets
9 washer
9 washer
9 rivets
11 rivets
11 rivets
12 rivets
12 rivets
12 rivets
13 washers
13 washers
14 rivets
15 rivet
15 rivets
15 rivets
16 rivets
16 rivets
R 22 rivets
22 rivets
22 rivets
23 rivets
25 rivets
26 rivets
28 rivets
30 rivets
23-61-04 01 -06023-61-04 01 -08023-61-05 02B-015A23-61-05 03B-02023-61-04 01 -04023-61-05 03B-03023-61-05 03B-030A23-61-05 03B-01023-61-05 01 -01023-61-05 01 -02023-61-05 03B-02023-61-05 01 -06523-61-05 01 -065A23-61-05 03B-01023-61-05 01 -05023-61-05 03B-02023-61-05 01 -06023-61-05 03B-04023-61-05 03B-040A23-61-05 01 -06523-61-05 01 -065A23-61-05 03B-01023-61-05 03B-02023-61-05 04 -06023-61-05 04 -060A23-61-05 04 -05023-61-05 04 -050A 54-55-11 02D-44554-55-11 02E-44554-55-11 02F-44523-61-07 01 -051A23-61-07 01 -070A23-61-07 01 -060A23-61-07 01 -050A23-61-07 01 -040
1EFF : ALL 1 23-61-42Page 413 1 1 May 01/05 1 1 1CES 1
D. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊3(11)
