曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 A. Do this test.
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the C/B panel 49VU:
 - open the C/B DIR 1 AND 2/ESS 150RH.
 2. On the C/B panel 121VU:  On the Forward Attendant Panel (FAP) 120RH:
 - open the C/B DIR 1 AND 2/NORM 151RH. - the CIDS CAUT light comes on.
 On the PTP 110RH:
 - the message CIDS DEGRADATION comes on.
 In the cockpit on the UPPER ECAM DISPLAY:
 - the message COM CIDS 1+2 FAULT comes on.
 NOTE : To show all of the message, you____ have to clear all other ECAM
 warnings. To clear all other ECAM warnings push the CLR pushbutton on the ECAM Control-Panel (ECP), until all of the COM message appears.
 Through the cockpit loudspeaker: - a single chime is heard.
 3. On the ECAM Control-Panel (ECP): - push the STS pushbutton.  On the LOWER ECAM DISPLAY:- the message INOP SYS CIDS comes on. 

R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 23-73-00Page 506 1201-299, 1May 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
4. On the C/B panel 121VU:
 -after approx. 10 s close the
 C/B DIR 1 AND 2/NORM 151RH.

 5. On the C/B panel 49VU:
 -close the C/B DIR 1 AND 2/ESS  - the CIDS CAUT light goes off.
 150RH.

 NOTE : Wait approx. 5 min before you start the next test step.
____
 6. On the Programming and Test Panel (PTP) 110RH:
 -
push the DSPL ON membrane
switch.

 -
push the SYSTEM STATUS related membrane switch.

-
push the CONT related membrane switch until the < MAINTENANCE message comes on.

 -
push the MAINTENANCE related membrane switch.

 -
push the CONT related membrane switch until the < GND SCAN message comes on.

 -
push the GND SCAN related
membrane switch.

-
push the RET related membrane switch until the SYSTEM STATUS page comes on.

-after approx. 5 min the CIDS CAUT light is still off.
 In the cockpit on the UPPER and LOWER ECAM DISPLAY:
 -all CIDS FAULT messages are off.
On the PTP 110RH:
-
the CIDS menu page comes on.

-
the SYSTEM STATUS page comes on withsystem OK messages.

-
the next system status related pageswith system OK messages come on.

-
the MAINTENANCE page comes on.

-
the GND SCAN page with the NO FAILUREmessage comes on.

-
the SYSTEM STATUS page comes on.

R 1EFF : 001-049, 051-099, 101-105, 201-299, 1 23-73-00Page 507 1 1 May 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
- push the CONT related membrane
 switch until the < MAINTENANCE
 message comes on.
 - push the MAINTENANCE related  - the MAINTENANCE page comes on.
 membrane switch.
 - push the CONT related membrane  - the < CLASS 3 FAULTS message comes
 switch.  on.
 - push the < CLASS 3 FAULTS  - the CLASS 3 FAULT page with NO
 related membrane switch.  FAILURE messages comes on.

 NOTE : An erroneous CLASS 3 FAULT message will be recorded for each LED
____ (without bulbs) Cabin Sign; if the test of the related signs is not deactivated in the CAM.
 -push the DSPL ON membrane  - the CIDS menu page comes on.
 switch.

 **ON A/C 151-199,
 Subtask 23-73-00-740-051-A
 A. Do this test.
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
 On the C/B panel 49VU:

 - open the C/Bs DIR ESS/1 and DIR ESS/2 150RH and 157RH.

 2.
 On the C/B panel 121VU:

- open the C/Bs DIR NORM/1 and DIR NORM/2 151RH and 156RH.
On the Forward Attendant Panel (FAP) 120RH:
-the CIDS CAUT light comes on. On the PTP 110RH:
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 23-73-00Page 508 1201-299, 1May 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
3. On the ECAM Control-Panel (ECP):
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊3(137)